Pioneer AVHP5700DVD - In-Dash 6.5 Monitor DVD Player 설치 매뉴얼 - 페이지 3
{카테고리_이름} Pioneer AVHP5700DVD - In-Dash 6.5 Monitor DVD Player에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer AVHP5700DVD - In-Dash 6.5 Monitor DVD Player 8 페이지. Owner's manual
Pioneer AVHP5700DVD - In-Dash 6.5 Monitor DVD Player에 대해서도 마찬가지입니다: 매뉴얼 (39 페이지), 소유자 매뉴얼 (34 페이지)
페이지 인쇄
Connecting the Units
When connecting with a rear view camera
When using this product with a rear view camera, automatic switching to video from a rear
view camera when the gear shift is moved to REVERSE (R) position is possible.
When connecting to a navigation unit, rear view mode also allows you to check what is
behind you while driving. For details, refer to the Operation Manual.
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY
RESULT IN INJURY OR DAMAGE.
CAUTION
• The screen image may appear reversed.
• The rear view camera function is to use this product as an aid to keep an eye on trailers, or backing into a tight
parking spot. Do not use this function for entertainment purposes.
• The object in rear view may appear closer or more distant than in reality.
CAUTION
You must use a camera
20 cm
which outputs mirror
(7-7/8 in.)
reversed images.
RCA cable
(sold separately)
Rear view camera in
rear view camera
To video output
15 cm
8 m
Extension lead (supplied)
(5-7/8 in.)
(26 ft. 3 in.)
V
Violet/white
Violet/white
Fuse resistor
Of the two lead wires connected to the back
lamp, connect the one in which the voltage
changes when the gear shift is in the REVERSE
(R) position. This connection enables the unit to
sense whether the car is moving forwards or
backwards.
Connection method
1.
Clamp the lead.
2. Clamp firmly
f
firmly
needle-nosed
pliers.
Note:
• It is necessary to set B-CAM to ON in SET UP
when connecting the rear view camera.
When connecting with a multi-channel processor
AV-BUS input (Blue)
40 cm (1 ft. 4 in.)
IP-BUS input (Blue)
Blue
15 cm
Blue
(5-7/8 in.)
This product
IP-BUS cable (supplied with
23 cm (9 in.)
multi-channel processor)
Subwoofer output or non fading output
(SUBWOOFER OUTPUT o
r
NON-FADING OUTPUT)
RCA cable (supplied with
multi-channel processor)
Optical cable (supplied with
multi-channel processor)
Optical cable connection box
(supplied with multi-channel processor)
Blue
Multi-channel processor
(DEQ-P8000)
(sold separately)
Black
Blue
IP-BUS cable
Black
Blue
IP-BUS cable
(supplied with
TV tuner)
Hide-away TV tuner
with
(e.g. GEX-P5700TV)
(sold separately)
AV-BU cable (supplied
S
Black
with TV tuner)
Fig. 4
When connecting with a navigation unit and an iPod adapter
Video input
RCA cable
(
supplied with
DVD player)
This unit
15 cm (5-7/8 in.)
IP-BUS input (Blue)
IP-BUS cable
(Supplied with
the iPod adapter)
Black
iPod, iPod mini or iPod Photo
Optical cable
(sold separately)
Dock connector port
Dock connector
DVD Player
To video output
(Supplied with the iPod adapter)
(e.g. XDV-P90 or
(FRONT VIDEO
SDV-P7)
(sold separately)
OUTPUT)
IP-BUS
Blue
output
(Black)
Multi-CD Player
(sold separately)
When you connect a separately sold
DVD player to the separetely sold
multi-channel processor, the optical
cable from DVD player must be
connected to the optical cable 2 input
(OPT. IN2) of the multi-channel
processor.
Fig. 5
Connecting and installing the
optical cable connection box
26 pin cable input
WARNING
• Avoid installing this unit in such a location where
the operation of safety devices such as airbags is
Navigation unit
prevented by this unit. Otherwise, there is a danger
(e.g. AVIC-880DVD)
Yellow
of a fatal accident.
(sold separately)
• Avoid installing this unit in such a location where
or
the operation of the brake may be prevented.
26 pin cable
Vehicle Dynamics Processor
Otherwise, it may result in a traffic accident.
(supplied with Navigation
(e.g. AVG-VDP1)
• Fix this unit securely with the velcro tape or lock
unit or Vehicle Dynamics
(sold separately)
tie. If this unit is loose, it disturbs driving stability,
Processor)
which may result in a traffic accident.
IP-BUS cable
CAUTION
• Install this unit using only the parts supplied with
1.5 m
Black
Blue
this unit. If other parts are used, this unit may be
(4 ft. 11 in.)
damaged or could dismount itself, which leads to
an accident or trouble.
iPod adapter
• Do not install this unit near the doors where rain-
(e.g. CD-IB100)
water is likely to be spilled on the unit. Incursion
of water into the unit may cause smoke or fire.
Connecting the optical cable
1. Connect the optical cable and
Multi-CD player
ground lead to the main unit.
(sold separately)
(Fig. 7)
Connect the optical cable so that it does
1.5 m (4 ft. 11 in.)
not protrude from the unit, as shown in
the illustration. Fasten the ground lead
to the protrusion on the back of the
unit.
It is necessary to set AV IN to M-DVD
in SET UP when connecting to the DVD
player.
2. Connect the optical cable to the
optical cable connection box.
(Fig. 8)
Fig. 6
<ENGLISH>
Optical cable
Fig. 8
Installing the optical cable
connection box
• When installing the optical cable
connection box with the velcro
tape. (Fig. 9)
Install the optical cable connection box
using the velcro tape in the ample
space of the console box.
Velcro tape (hard)
Velcro tape (soft)
Fig. 9
• When installing the optical cable
connection box with the lock tie.
(Fig. 10)
Screw
Wrap the optical cable and connection
box with the protection tape and fasten
with the power code using the lock tie.
Wrap with the protection tape
Fig.7
Fasten with the lock tie
Fig. 10