Pioneer AVIC-7100NEX 펌웨어 업데이트 매뉴얼
{카테고리_이름} Pioneer AVIC-7100NEX에 대한 펌웨어 업데이트 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer AVIC-7100NEX 7 페이지. How to turn off avicsync connected navigation services to restore android auto functionality.
Pioneer AVIC-7100NEX에 대해서도 마찬가지입니다: 매뉴얼 (3 페이지), 설치 매뉴얼 (34 페이지), 운영 매뉴얼 (10 페이지)
페이지 인쇄
System Firmware Update Instructions for Pioneer AVIC-5100NEX, AVIC-
6100NEX, and AVIC-7100NEX In-dash Receivers
IMPORTANT
Please download and print these firmware update instructions before downloading and installing the
firmware update. It is important that you complete all steps correctly and in the order described below.
If you install this firmware, all navigation function settings and save data will be formatted to
default settings. Once the update has finished, you will need to reconfigure the settings.
In order to perform this update, the following items are needed:
Pioneer AVIC-7100NEX, AVIC-6100NEX, or AVIC-5100NEX receiver
One of the following storage devices with at least 2 GB of storage capacity
- USB storage device
- SD card (AVIC-7100NEX only)
CAUTION
The only USB port that supports the firmware update is USB port 1.
USB or SD card should be blank (should not contain any files) and formatted to FAT32.
DO NOT turn your unit off or disconnect the SD card or USB storage device while the firmware
is being updated.
You can only update the firmware when the vehicle is stopped and the parking brake is engaged.
Displaying the firmware version
Check whether the firmware of your unit needs to be updated by checking the version number of the
firmware.
Procedure:
1.
Press the HOME button to display the Top menu screen.
2.
Touch the following keys in the following order.
The "System" screen appears
3.
Scroll down the list.