Pioneer AVIC-U310BT 설치 매뉴얼 - 페이지 15
{카테고리_이름} Pioneer AVIC-U310BT에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer AVIC-U310BT 45 페이지. Flash memory navigation audio receiver
Pioneer AVIC-U310BT에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 브로셔 (9 페이지), 중요 정보 매뉴얼 (38 페이지)
페이지 인쇄
Installation
Installing this navigation
system
Installation notes
! Do not install this navigation system in
places where it may become subject to
high temperatures or humidity, such as:
— Places close to a heater, vent or air con-
ditioner.
— Places exposed to direct sunlight, such
as on top of the dashboard.
— Places that may be splashed by rain, for
example close to the door.
! Install this navigation system in an area
strong enough to bear its weight. Choose a
position where this navigation system can
be firmly installed, and install it securely. If
this navigation system is not securely in-
stalled, the current location of the vehicle
cannot be displayed correctly.
! Install the navigation unit horizontally on a
surface within 0 degrees to 30 degrees tol-
erance (within 10 degrees to the left or
right). Improper installation of the unit with
the surface tilted more than these toler-
ances increases the potential for errors in
the location display, and might otherwise
cause reduced display performance.
! When installing, to ensure proper heat dis-
persal when using this unit, make sure you
leave ample space behind the rear panel
and wrap any loose cables so they are not
blocking the vents.
Leave ample space
5см (2 in.)
10см (3-7/8 in.)
! The semiconductor laser will be damaged
if it overheats, so don't install the naviga-
tion unit anywhere hot —for instance, near
a heater outlet.
Parts supplied
The navigation unit
Flush surface screw
(5 mm × 8 mm)
(8 pcs.)
p *For in-store display use only
Section
04
Dashboard
Binding screw
(5 mm × 8 mm)
(8 pcs.)
Screw*
(2 mm × 8 mm)
15
En