Pioneer AVIC-X1R 하드웨어 매뉴얼 - 페이지 21
{카테고리_이름} Pioneer AVIC-X1R에 대한 하드웨어 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer AVIC-X1R 30 페이지. Dvd av navigation head-unit
Pioneer AVIC-X1R에 대해서도 마찬가지입니다: 매뉴얼 (39 페이지), 하드웨어 매뉴얼 (27 페이지)
페이지 인쇄
MAN-AVIC-X1R-EN.book Page 19 Wednesday, May 4, 2005 4:45 PM
Appendix
Troubleshooting
About troubleshooting other than description
below
Appendix of the Operation Manual
Symptom
Cause
There's no picture.
The handbrake cord is not connected.
The handbrake is not applied.
The operation is prohibited for the disc.
The icon
is
displayed, and
The operation is not compatible with the
operation is not
disc's organization.
possible.
The picture stops
Reading of data has become impossible
(pauses) and the unit
during playback.
cannot be operated.
The picture is
The aspect setting is incorrect for the
stretched, the aspect is
display.
incorrect.
Rear display picture
• The source disc being listened to with the
disappears.
product has been ejected.
• The disc without a video source is
playbacked.
• The REAR button was pressed and REAR
ON mode switched off.
• There was a problem with the rear display
or a faulty wiring connection, for example.
• Rear View is selected on the screen.
• When the gearstick is in [R], displays rear
view camera images. (When "NAVI" is
selected in REAR DISP menu.)
Nothing is displayed
The setting for the rear view camera is
and the touch panel
incorrect.
keys cannot use.
The gearstick was placed in [R] when the
rear view camera was not connected.
LCD Panel knocking
Incorrect setting of angle.
against your vehicle's
console or dashboard.
Video image appears
This happens when videos are viewed in
grainy.
CINEMA or ZOOM mode.
Action (See)
Connect a handbrake cord, and apply the
handbrake.
Connect a handbrake cord, and apply the
handbrake.
This operation is not possible.
This operation is not possible.
After pressing 7 once, start playback once
more.
Select the appropriate setting for your
display. (Page 15)
• Before ejecting the disc, switch the
source.
• Switch the source with a video source.
• Press the REAR button to turn REAR ON
mode on.
• Check the rear display and its connection.
• Select view mode other than Rear View.
• Select SOURCE in REAR DISP menu.(or
when you move the shift lever other than
[R] position, the screen will be returned to
the previous display.)
Connect a rear view camera correctly.
Press NAVI/AV button to return to the
source display and then select the correct
setting for CAMERA.
About CAMERA setting
Operation
Manual
Press ANGLE (+/–) to adjust the LCD
angle. Forcibly adjusting the LCD panel by
hand may damage it.
Select a different mode to view videos.
19