Pioneer AVIC-X920BT 운영 매뉴얼 - 페이지 18
{카테고리_이름} Pioneer AVIC-X920BT에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer AVIC-X920BT 20 페이지. Flash memory multimedia av navigation receiver
Pioneer AVIC-X920BT에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 사용자 정보 (45 페이지)
페이지 인쇄
Chapter
02
Basic operation
When the data related to map data is
stored
If data related to map data, such as custo-
mized POI data, is stored on the SD memory
card, operating procedures are slightly differ-
ent.
1
Press the h button and then touch
[Eject SD].
2
Touch [Yes].
The navigation system restarts, and a message
prompting you to remove the SD memory card
appears.
3
Eject the SD memory card while the
message is displayed.
Eject the SD memory card before touching
[OK].
4
Touch [OK].
The navigation system restarts.
Plugging and unplugging a
USB storage device
CAUTION
! To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
18
En
! If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
Plugging in a USB storage device
% Plug a USB storage device into the USB
connector.
USB connector
p Compatibility with all USB storage devices
is not guaranteed.
This navigation system may not achieve op-
timum performance with some USB sto-
rage devices.
p Connection via a USB hub is not possible.
Unplugging a USB storage device
% Pull out the USB storage device after
checking that no data is being accessed.
Connecting and
disconnecting an iPod
CAUTION
! To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
USB storage device