Pioneer AVIC-Z720DAB 설치 매뉴얼 - 페이지 12
{카테고리_이름} Pioneer AVIC-Z720DAB에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer AVIC-Z720DAB 17 페이지. Navigation av system
Pioneer AVIC-Z720DAB에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지), 시스템 펌웨어 업데이트 지침 (5 페이지)
After installation
After installing this
product
1
Reconnect the negative (-) terminal of
the vehicle's battery.
First, double-check that all connections
are correct and that this product is
installed correctly. Reassemble all
vehicle components that you previously
removed. Then reconnect the negative
(-) cable to the negative (-) terminal of
the battery.
2
Start the engine.
3
Press the RESET button.
Press the RESET button on this product
with a pointed object such as the tip of
a pen.
Z920DAB
Z720DAB
• Some of the settings and recorded
contents will not be reset.
4
Change the settings as desired.
• For details concerning operations,
refer to Operation Manual.
12
En
5
Drive down an unobstructed road
until the GPS starts receiving the
signal normally.
NOTE
After installing this product, be sure to
check at a safe place that the vehicle is
performing normally.