Pioneer AVX-7300 운영 매뉴얼 - 페이지 19

{카테고리_이름} Pioneer AVX-7300에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer AVX-7300 28 페이지. Pioneer avx-7300 car audio video system
Pioneer AVX-7300에 대해서도 마찬가지입니다: 설치 매뉴얼 (6 페이지), 설치 매뉴얼 (14 페이지), 설치 매뉴얼 (6 페이지)

페이지 인쇄

Switching the Video Select Setting

You can change the video select setting.

Press the WIDE button and select the video select mode (VSEL SET) in

the Display Setting Menu.

Switch to the desired video select setting in the following order:

AUTO = MANUAL = AVM

7 AUTO

When the Head Unit source is switched to a component (e.g. SDV-P7) connected to

the AV-BUS, output automatically switches to video from that component.

Note:

• If an SDV-P7 is connected, you can use this function when using the SDV-P7 with the IP-

BUS mode.

7 MANUAL

You can switch between VTR and AV with the V.SOURCE button. (Refer to

page 12.)

7 AVM

This prevents switching from video from a component connected to the RGB input.

Setting the Automatic Open Mode

To prevent the display from hitting the shift lever of an automatic vehicle when it is in the

"P" (park) position, or when you do not wish opening/closing of the display to be carried out

automatically, you can switch this function ON/OFF.

Press the WIDE button and select the automatic open mode (AUTO

OPEN) in the Display Setting Menu.

Switch the automatic open ON/OFF.