Pioneer AVX-7300 설치 매뉴얼 - 페이지 9

{카테고리_이름} Pioneer AVX-7300에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer AVX-7300 14 페이지. Pioneer avx-7300 car audio video system
Pioneer AVX-7300에 대해서도 마찬가지입니다: 운영 매뉴얼 (28 페이지), 설치 매뉴얼 (6 페이지), 설치 매뉴얼 (6 페이지)

페이지 인쇄

1. Connecting the Power Cord

Installation

Note:

• Before finally installing the unit, connect the

wiring temporarily, making sure it is all connect-

ed up properly, and the unit and the system work

properly.

• Use only the parts included with the unit to ensure

proper installation. The use of unauthorized parts

can cause malfunctions.

• Consult with your nearest dealer if installation

requires the drilling of holes or other modifica-

tions of the vehicle.

• Install the unit where it does not get in the dri-

ver's way and cannot injure the passenger if there

is a sudden stop, like an emergency stop.

• Do not place the display in a position where it

will impede the driver's visibility or affect the

operation of your vehicle's air bags.

DIN Front/Rear-mount

This unit can be properly installed either from "Front" (conventional DIN Front-mount) or

"Rear" (DIN Rear-mount installation, utilizing threaded screw holes at the sides of unit

chassis). For details, refer to the following illustrated installation methods.

DIN Front-mount

Installation with the rubber bush

1. Remove the frame. (Fig. 6)

• If installation angle exceeds 30° from horizontal,

the unit might not give its optimum performance.

(Fig. 5)

Frame

Pull out to remove the frame.

(When reattaching the frame, point the

side with a groove downwards and

attach it.)

30¡

Fig. 5

Fig. 6