Pioneer CDX-M2096ZRN 서비스 매뉴얼 - 페이지 42

{카테고리_이름} Pioneer CDX-M2096ZRN에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer CDX-M2096ZRN 47 페이지. Multi-compact disc player

CDX-M2096ZRN

Removing the Pick-up Unit

1. Attach the Short Pin onto the Flexible PCB of the

Pick-up Unit. (Fig.5)

2. Remove the Flexible PCB from the connector. (Fig.6)

3. Remove the Torsion Spring which is pressed against

the leading edge of the Feed Screw. (Fig.6)

4. Remove the Screw and Pulley Cover. (Fig.6)

5. Remove the Belt and the Pick-up Unit with the Feed

Screw still attached. (Fig.6)

6. Lift the Tabs of the rack section of the Holder and

remove the Feed Screw. While doing so, be careful

not to lose the Bearings on the ends of the Feed

Screw. (Fig.6)

Removing the CD Core Unit (Fig.6)

1. After procedures 1 and 2 for removing the Pick-up

Unit, remove the connector.

2. Remove the Elevation Motor Assy lead wires marked

with an arrow which are soldered onto the CD Core

Unit.

3. Remove screw (A), screw (B) and screws (C)(2

screws), then remove the CD Core Unit.

PCB

Fig. 5

Fig. 6