Pioneer deh--x1810ub 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Pioneer deh--x1810ub에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer deh--x1810ub 48 페이지. Cd rds receiver

페이지 인쇄

Turn the M.C. dial to select [FUNCTION], then press to confirm.

Turn the M.C. dial to select [BSM], then press to confirm.

To seek a station manually

After selecting the band, press

Press and hold

then release to seek an available station. Scanning stops

when the unit receives a station. To cancel seek tuning, press

NOTE

[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 8).

To store stations manually

While receiving the station you want to store, press and hold one of the number

buttons (1/

to 6/

) until it stops flashing.

CD/USB/AUX

Playing back

Disconnect headphones from the device before connecting it to the unit.

SRC (source)/OFF

(eject)

Disc loading slot

M.C. (multi-control) dial

Insert a disc into the disc loading slot with the label side up.

to select a station.

USB port

AUX input jack (3.5 mm stereo jack)

To eject a disc, stop playback first then press

USB devices (including Android)

Open the USB port cover.

Plug in the USB device using an appropriate cable.

NOTE

To automatically switch to [USB] source when a USB device is connected to the unit, set [USB AUTO] to

[ON] in the SYSTEM settings (page 9).

CAUTION

Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device connected

directly to the unit will protrude out from the unit, which could be dangerous.

Before removing the device, stop playback.

AOA connections

For details on AOA connection, see page 7.

MTP connection

A device installed with Android OS 4.0 or later can be connected to the unit via MTP, using the cable

supplied with the device. However, depending on the connected device and the numbers of the files in

the device, audio files/songs may not be able to be played back via MTP. Note that MTP connection is

not compatible with WAV file formats, and cannot be used with the MIXTRAX function.

NOTE

If you use an MTP connection, [ANDROID WIRED] needs to be set to [MEMORY] in the SYSTEM settings

(page 9).

AUX

Insert the stereo mini plug into the AUX input jack.

Press SRC/OFF to select [AUX] as the source.

NOTE

If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source (page 9).

Operations

You can make various adjustments in the FUNCTION settings (page 8).

Note that the following operations do not work for an AUX device. To operate an AUX

device, use the device itself.

Purpose

Select a folder/album*

Select a track/song (chapter)

Operation

Press 1/

or 2/

Press