Pioneer DEH-2100IB - Radio / CD 소유자 매뉴얼 - 페이지 21

{카테고리_이름} Pioneer DEH-2100IB - Radio / CD에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer DEH-2100IB - Radio / CD 32 페이지. Cd receiver
Pioneer DEH-2100IB - Radio / CD에 대해서도 마찬가지입니다: 브로셔 (9 페이지)

페이지 인쇄

Installation

Important

! Check all connections and systems before

final installation.

! Do not use unauthorized parts. Use of un-

authorized parts may cause malfunctions.

! Consult your dealer if installation requires dril-

ling of holes or other modifications to the vehi-

cle.

! Do not install this unit where :

— it may interfere with operation of the vehi-

cle.

— it may cause injury to a passenger as a re-

sult of a sudden stop.

! The semiconductor laser will be damaged if it

overheats. Install this unit away from hot

places such as near the heater outlet.

! Optimum performance is obtained when the

unit is installed at an angle of less than 60°.

! When installing, to ensure proper heat disper-

sal when using this unit, make sure you leave

ample space behind the rear panel and wrap

any loose cables so they are not blocking the

vents.

DIN front/rear mount

This unit can be properly installed either from

"Front" (conventional DIN front-mount) or

"Rear" (DIN rear-mount installation, utilizing

threaded screw holes at the sides of unit chas-

sis). For details, refer to the following installa-

tion methods.

DIN Front-mount

Installation with metal strap and screws

Insert the mounting sleeve into the

dashboard.

When installing in a shallow space, use a sup-

plied mounting sleeve. If there is enough

space behind the unit, use factory supplied

mounting sleeve.

screwdriver to bend the metal tabs (90°)

into place.

Use commercially available parts when instal-

60°

ling.

# Make sure that the unit is installed securely in

place. Unstable installation may cause this unit

to malfunction, such as sound skip.

Secure the mounting sleeve by using a

Dashboard

Mounting sleeve

Install the unit.

Nut

Metal strap

Screw

Screw (M4 8)

Section

Filrewall or

metal support