Pioneer DEH-2220UB 운영 매뉴얼 - 페이지 4

{카테고리_이름} Pioneer DEH-2220UB에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer DEH-2220UB 20 페이지. Cd rds receiver

페이지 인쇄

Connections

Note

Depending on the kind of

vehicle, the function of 2*

and 4* may be different. In

this case, be sure to connect

1* to 4* and 3* to 2*.

Connect leads of the

same color to each other.

Yellow (2*)

Yellow (1*)

Back-up (or

Connect to the constant 12 V

accessory)

supply terminal.

Red (4*)

Red (3*)

Accessory (or

Connect to terminal controlled by

back-up)

ignition switch (12 V DC).

Black (chassis ground)

Connect to a clean, paint-free metal location.

ISO connector

In some vehicles, the ISO connector may

be divided into two. In this case, be sure to

connect to both connectors.

This product

Rear output

Antenna jack

Fuse (10 A)

Wired remote input

Hard-wired remote control

adaptor can be connected

(sold separately).

Blue/white

Connect to system control terminal of the

power amp (max. 300 mA 12 V DC).

Speaker leads

White:

Front left +

Front left -

White/black:

Front right +

Gray:

Front right -

Gray/black:

Rear left +

Green:

Rear left -

Green/black:

Violet:

Rear right +

Violet/black:

Rear right -

To Rear output

Yellow/black

If you use an equipment with Mute function,

wire this lead to the Audio Mute lead on that

equipment. If not, keep the Audio Mute lead

free of any connections.

Blue/white (6*)

Connect to auto-antenna relay control

terminal (max. 300 mA 12 V DC).

Blue/white (5*)

The pin position of the ISO connector will differ

depending on the type of vehicle. Connect 5* and 6*

when Pin 5 is an antenna control type. In another type

of vehicle, never connect 5* and 6*.

Power amp (sold

separately)

Connect with

RCA cables (sold

separately)

System remote control

Left

Right

Rear

speaker

Perform these connections when using

the optional amplifier.