Pioneer DEH-2300 운영 매뉴얼 - 페이지 15

{카테고리_이름} Pioneer DEH-2300에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer DEH-2300 30 페이지. High power cd player with fm/am tuner
Pioneer DEH-2300에 대해서도 마찬가지입니다: 설치 매뉴얼 (6 페이지)

페이지 인쇄

Front Image Enhancer Function (FIE)

The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front imaging

by cutting mid- and high-range frequency output from the rear speakers, limiting their out-

put to low-range frequencies. You can select the frequency you want to cut.

Precaution:

• When the F.I.E. function is deactivated, the rear speakers output sound of all frequencies, not just

bass sounds. Reduce the volume before disengaging F.I.E. to prevent a sudden increase in volume.

1. Press the AUDIO button and select the F.I.E. mode (FIE) in the Audio Menu.

2. Switch the F.I.E. function

ON/OFF with the 5/∞ but-

tons.

3. Select the desired frequency

with the 2/3 buttons.

100 + = 160 + = 250 (Hz)

Note:

• After switching the F.I.E. function ON, select the Fader/Balance mode in the Audio Menu, and

adjust front and rear speaker volume levels until they are balanced.

• Switch the F.I.E. function OFF when using a 2-speaker system.

Source Level Adjustment (SLA)

The SLA (Source Level Adjustment) function prevents radical leaps in volume level when

switching between sources. Settings are based on the FM volume, which remains

unchanged.

1. Compare the FM volume with the volume of the other source.

(e.g. Built-in CD player)

2. Press the AUDIO button and select the SLA mode (SLA) in the Audio Menu.

3. Increase or decrease the level

with the 5/∞ buttons.

The display shows "+4" – "–4".

Note:

• Since the FM volume is the control, SLA is not possible in the FM modes.

• The AM volume level, which is different from the FM base setting volume level, can also be

adjusted similar to sources other than tuner.