Pioneer DEH-4500BT 운영 매뉴얼 - 페이지 20

{카테고리_이름} Pioneer DEH-4500BT에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer DEH-4500BT 33 페이지. Cd rds receiver
Pioneer DEH-4500BT에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지)

페이지 인쇄

Section

Operating this unit

Turn M.C. to select the illumination

color.

You can select any one of the options in the

following list:

! FLASHING – The color selected from

KEY COLOUR flashes.

! FLASH MODE1 to FLASH MODE6 – The

system automatically cycles through all

available key colors for this unit. Select the

desired mode.

! OFF – No change in key color made when

incoming calls are received.

Switching the dimmer setting

You can adjust the brightness of illumination.

Press M.C. to display the main menu.

Turn M.C. to display ILLUMI and press

to select.

Turn M.C. to display DIMMER and press

to select the desired setting.

OFF (off)—ON (on)

! You can also change the dimmer setting by

pressing and holding

Customizing the

illumination color

You can create custom illumination colors for

both KEY COLOUR and DISP COLOUR.

Press M.C. to display the main menu.

Turn M.C. to display ILLUMI and press

to select.

Turn M.C. to display KEY COLOUR or

DISP COLOUR. Press to select.

Press M.C. and hold until the customiz-

ing illumination color setting appears in

the display.

/DIMMER.

Press M.C. to select the primary color.

R (red)—G (green)—B (blue)

Turn M.C. to adjust the brightness level.

Adjustment range: 0 to 60

# You cannot select a level below 20 for all three

of R (red), G (green), and B (blue) at the same

time.

# You can also perform the same operation on

other colors.

Note

You cannot create a custom illumination color

while SCAN, WARM, AMBIENT or CALM is

selected.

About MIXTRAX

MIXTRAX technology is used to insert a variety

of sound effects in between songs, allowing

you to experience your music as a nonstop

mix complete with visual and lighting effects.

Notes

! Depending on the file/song, sound effects

may not be added.

! MIXTRAX includes a MIXTRAX flashing color

mode that when switched on turns the flash-

ing colors on and off in time with the audio

track. If you find the feature distracting while

driving, please turn MIXTRAX off. Refer to Op-

erations using the MIXTRAX button on page

MIXTRAX menu

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select MIXTRAX.

Turn M.C. to select the MIXTRAX func-

tion.

Once selected, the following MIXTRAX func-

tions can be adjusted. The function is enabled

when MIXTRAX is on.