Pioneer DEH-4590BT 소유자 매뉴얼 - 페이지 14

{카테고리_이름} Pioneer DEH-4590BT에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer DEH-4590BT 25 페이지. Cd rds receiver

페이지 인쇄

Section

Operating this unit

Press M.C. and hold until the customizing

illumination color setting appears in the dis-

play.

Press M.C. to select the primary color.

R (red)—G (green)—B (blue)

Turn M.C. to adjust the brightness level.

Adjustment range: 0 to 60

# You cannot select a level below 20 for all three of

R (red), G (green), and B (blue) at the same time.

# You can also perform the same operation on

other colors.

Note

You cannot create a custom illumination color

while SCAN, WARM, AMBIENT or CALM is se-

lected.

About MIXTRAX

Only for DEH-X6590BT

MIXTRAX technology is used to insert a variety

of sound effects in between songs, allowing you

to experience your music as a nonstop mix com-

plete with visual and lighting effects.

Notes

! Depending on the file/song, sound effects

may not be added.

! MIXTRAX includes a MIXTRAX flashing color

mode that when switched on turns the flash-

ing colors on and off in time with the audio

track. If you find the feature distracting while

driving, please turn MIXTRAX off. Refer to Op-

erations using the MIXTRAX button on page 6.

MIXTRAX menu

Only for DEH-X6590BT

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select MIXTRAX.

Turn M.C. to select the MIXTRAX func-

tion.

Once selected, the following MIXTRAX functions

can be adjusted. The function is enabled when

MIXTRAX is on.

SHT PLAYBACK (short playback mode)

You can select the length of the playback time.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

1.0 MIN (1.0 minute)—1.5 MIN (1.5 minutes)—

2.0 MIN (2.0 minutes)—2.5 MIN (2.5 minutes)

—3.0 MIN (3.0 minutes)—OFF (off)

! Turn this option OFF if you want to play a selec-

tion all the way through from start to finish.

FLASH AREA (flash area)

You can select areas for flashing colors.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

KEY/DISPLAY (key and display)—KEY (key)—

OFF (off)

! When OFF is selected, the color set under IL-

LUMI is used as the display color.

FLASH PATTERN (flash pattern)

Operating this unit

You can select flashing color patterns.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

You can select any one of the options in the fol-

lowing list:

! SOUND LEVEL 1 to SOUND LEVEL 6 –

Flashing colors will flash on and off in syn-

chronization with the sound level in a

song. Select the desired mode.

! LOW PASS 1 to LOW PASS 6 – Flashing

colors will flash on and off in synchroniza-

tion with the bass level in a song. Select

the desired mode.

! RANDOM 1 – The pattern for the flashing

colors is randomly selected from the sound

level mode and low pass mode.

! RANDOM 2 – The pattern for the flashing

colors is randomly selected from the sound

level mode.

! RANDOM 3 – The pattern for the flashing

colors is randomly selected from the low

pass mode.

DISPLAY FX (display effect)

The MIXTRAX special effects display can be turned

on or off.

1 Press M.C. to select the desired setting.

ON (MIXTRAX special effects display)—OFF

(normal display)

CUT IN FX (manual cut-in effect)

You can turn on or off the MIXTRAX sound effects

while manually changing tracks.

1 Press M.C. to select the desired setting.

ON (on)—OFF (off)

Initial menu

Press and hold SRC/OFF until the unit

turns off.

Press and hold M.C. until the main menu

appears in the display.

Turn M.C. to change the menu option

and press to select INITIAL.

Turn M.C. to select the initial menu func-

tion.

Once selected, the following initial menu func-

tions can be adjusted.

FM STEP (FM tuning step)

Normally, the FM tuning step employed by seek

tuning is 50 kHz. When AF or TA is on, the tuning

step automatically changes to 100 kHz. It may be

preferable to set the tuning step to 50 kHz when

AF is on.

! The tuning step remains at 50 kHz during man-

ual tuning.

1 Press M.C. to select the FM tuning step.

50 (50 kHz)—100 (100 kHz)

MW STEP (MW tuning step)

The MW tuning step can be switched between

9 kHz and 10 kHz.

1 Press M.C. to select the MW tuning step.

9 (9 kHz)—10 (10 kHz)

SP-P/O MODE (rear output and preout setting)