Pioneer DEH-5200SD 사용 설명서 - 페이지 15

{카테고리_이름} Pioneer DEH-5200SD에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer DEH-5200SD 27 페이지. Cd rds receiver

페이지 인쇄

Operating this unit

This unit is equipped with a subwoofer output which

can be turned on or off.

1 Press M.C. to turn subwoofer output on or off.

2 Push M.C. left or right to select the phase of sub-

woofer output.

Push M.C. left to select reverse phase and Re-

verse appears in the display. Push M.C. right to

select normal phase and Normal appears in the

display.

Sub W.2 (subwoofer adjustment)

When the subwoofer output is on, you can adjust the

cut-off frequency and the output level of the subwoo-

fer.

Only frequencies lower than those in the selected

range are outputted from the subwoofer.

1 Push M.C. left or right to select cut-off frequency.

50Hz—63Hz—80Hz—100Hz—125Hz

2 Push M.C. up or down to adjust the output level

of the subwoofer.

Each time M.C. is pushed up or down, subwoofer

level increases or decreases. +6 to -24 is dis-

played as the level is increased or decreased.

Bass (bass boost)

1 Push M.C. up or down to select a desired level.

0 to +6 is displayed as the level is increased or de-

creased.

HPF (high pass filter adjustment)

When you do not want low sounds from the subwoo-

fer output frequency range to play from the front or

rear speakers, turn on the HPF (high pass filter). Only

frequencies higher than those in the selected range

are output from the front or rear speakers.

1 Press M.C. to turn high pass filter on or off.

2 Push M.C. left or right to select cut-off frequency.

50Hz—63Hz—80Hz—100Hz—125Hz

SLA (source level adjustment)

SLA (Source level adjustment) lets you adjust the vo-

lume level of each source to prevent radical changes

in volume when switching between sources.

! Settings are based on the FM volume level, which

remains unchanged.

Before adjusting source levels, compare the FM

volume level with the level of the source you wish

to adjust.

! The MW/LW volume level can also be adjusted

with source level adjustments.

1 Push M.C. up or down to adjust the source vo-

lume.

Adjustment range: +4 to –4

Note

When selecting FM as the source, you cannot

switch to SLA.

Initial Settings

1 Function display

! Shows the function status.

Press SRC/OFF and hold until the unit

turns off.

Press M.C. and hold until the initial set-

ting menu appears in the display.

Turn M.C. to select the initial setting.

After selecting, perform the following proce-

dures to set the initial setting.

Language select (multi language)

For your convenience, this unit equips multiple lan-

guage display. You can select the language best sui-

ted to your first language.

1 Press M.C. to select the language.

English—Français—Italiano—Español—

Deutsch—Nederlands—РУССКИЙ

Calendar (setting the date)

1 Push M.C. left or right to select the segment of

the calendar display you wish to set.

Year—Day—Month

2 Push M.C. up or down to set the date.

Clock (setting the clock)

Section