Pioneer DEH-8400BT 운영 매뉴얼 - 페이지 23

{카테고리_이름} Pioneer DEH-8400BT에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer DEH-8400BT 37 페이지. Cd rds receiver
Pioneer DEH-8400BT에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 설치 매뉴얼 (37 페이지)

페이지 인쇄

Section

Operating this unit

This unit's rear output (rear speaker leads output and

RCA rear output) can be used for full-range speaker

(Rear SP :F.Range) or subwoofer (Rear SP :S/W) con-

nection. If you switch the rear output setting to Rear

SP :S/W, you can connect a rear speaker lead directly

to a subwoofer without using an auxiliary amp.

1 Press M.C. to switch the rear output setting.

! When no subwoofer is connected to the rear

output, select Rear SP :F.Range (full-range

speaker).

! When a subwoofer is connected to the rear

output, select Rear SP :S/W (subwoofer).

! Even if you change this setting, there will be no

output unless you turn the subwoofer output on

(refer to Subwoofer1 (subwoofer on/off setting)

on page 16).

! If you change this setting, subwoofer output in

the audio menu will return to the factory settings.

! Both rear speaker lead outputs and RCA rear out-

put are switched simultaneously in this setting.

Demonstration (demo display setting)

1 Press M.C. to turn the demo display on or off.

Ever-scroll (scroll mode setting)

When ever scroll is set to ON, recorded text informa-

tion scrolls continuously in the display. Set to OFF if

you prefer the information to scroll just once.

1 Press M.C. to turn the ever scroll on or off.

BT AUDIO (Bluetooth audio activation)

You need to activate the BT Audio source in order to

use a Bluetooth audio player.

1 Press M.C. to turn the BT Audio source on or off.

Clear memory (resetting the Bluetooth wireless tech-

nology module)

Bluetooth device data can be deleted. To protect per-

sonal information, we recommend deleting this data

before transferring the unit to other persons. The fol-

lowing settings will be deleted.

! phone book entries on the Bluetooth telephone

! preset numbers on the Bluetooth telephone

! registration assignment of the Bluetooth tele-

phone

! call history of the Bluetooth telephone

! information of the connected Bluetooth telephone

! PIN code of the Bluetooth device

1 Press M.C. to show the confirmation display.

YES is displayed. Clearing memory is now on

standby.

If you do not want to reset phone memory, turn

M.C. to display CANCEL and press to select.

2 Press M.C. to clear the memory.

Cleared is displayed and the settings are deleted.

! While this function is in use, do not turn off

BT Version info. (Bluetooth version display)

You can display the system versions of this unit and

of Bluetooth module.

1 Press M.C. to display the information.

! Turning M.C. or LEVER cycles between the

S/W UPDATE (updating the software)

This function is used to update this unit with the lat-

est software. For information on the software and up-

dating, refer to our website.

! Never turn the unit off while the software is being

updated.

1 Press M.C. to display the data transfer mode.

Follow the on-screen instructions to finish updat-

ing the software.

Other functions

Using an AUX source

Insert the stereo mini plug into the

AUX input jack.

Press SRC/OFF to select AUX as the

source.

Autogood products «130»

the engine.

system version of this unit and that of the

Bluetooth module.