Pioneer DEH-P3550MP XM 운영 매뉴얼 - 페이지 10

{카테고리_이름} Pioneer DEH-P3550MP XM에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer DEH-P3550MP XM 20 페이지. Multi-cd control high power cd/mp3 player with fm/am tuner
Pioneer DEH-P3550MP XM에 대해서도 마찬가지입니다: 운영 매뉴얼 (20 페이지), 설치 매뉴얼 (4 페이지)

페이지 인쇄

Section

Tuner

Introduction of advanced

tuner operation

1 Function display

Shows the function status.

2 LOC indicator

Shows when local seek tuning is on.

3 Preset number indicator

Shows what preset has been selected.

% Press FUNCTION to display the function

names.

Press FUNCTION repeatedly to switch be-

tween the following functions:

BSM (best stations memory)LOCAL (local

seek tuning)

# To return to the frequency display, press

BAND.

Note

If you do not operate the function within about 30

seconds, the display is automatically returned to

the frequency display.

Storing and recalling

broadcast frequencies

If you press any of the preset tuning buttons

16 you can easily store up to six broadcast

frequencies for later recall with the touch of a

button.

HHHHHHHHHHHHHH

1 2

% When you find a frequency that you

want to store in memory press a preset

tuning button 16 and hold until the preset

number stops flashing.

The number you have pressed will flash in the

preset number indicator and then remain lit.

The selected radio station frequency has been

stored in memory.

The next time you press the same preset tun-

ing button 16 the radio station frequency is

recalled from memory.

Notes

! Up to 18 FM stations, 6 for each of the three

FM bands, and 6 AM stations can be stored in

memory.

! You can also use a and b to recall radio sta-

tion frequencies assigned to preset tuning

buttons 16.

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals

for good reception.

Press FUNCTION to select LOCAL.

Press FUNCTION until LOCAL appears in the

display.

Press a to turn local seek tuning on.

Local seek sensitivity (e.g., LOCAL 2) appears

in the display.

Press c or d to set the sensitivity.

There are four levels of sensitivity for FM and

two levels for AM:

FM: LOCAL 1LOCAL 2LOCAL 3

LOCAL 4

AM: LOCAL 1LOCAL 2