Pioneer DEH-P520 설치 매뉴얼 - 페이지 13

{카테고리_이름} Pioneer DEH-P520에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer DEH-P520 40 페이지.

DOOR LOCK (White/orange)

The white/orange lead should be connected to the "unlock" lead for your vehicles door

locking system, so that when you open the driver's door by your vehicle's remote control,

your Pioneer DFS Alarm is deactivated.

First, locate the two wires from the lock/unlock switch that operate the factory door lock

solenoids for the driver's side. Using a meter, determine which lead is used to unlock the

door; connect this to the white/orange lead of your Pioneer Car Stereo. In the DFS Alarm

Setting Menu, select the door-lock system type according to your vehicle (grounding or

non-grounding).

If you have difficulty wiring this connection, please consult your nearest Installation spe-

cialist.

Note:

• If your vehicle is equipped with a central door lock but the glass or shock sensor is not connected, if

the window is broken and the central door lock is released, this unit's DFS Alarm will not operate.

• Pioneer recommends that both a shock sensor and glass sensor be installed when you are using the

"Remote Disarming" feature.

Unlock

Lock/Unlock

Switch

Lock

Blue/brown (refer to "STARTER CUT-OFF".)

White/orange

White/red (refer to "ALARM SENSOR".)

Brown (refer to "ALARM OUTPUT".)

White/yellow (refer to "DOOR SWITCH".)

Switching

Relays

Lock Solenoid

This Product

Fig. 8