Pioneer MVH-X360BT 소유자 매뉴얼 - 페이지 17

{카테고리_이름} Pioneer MVH-X360BT에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer MVH-X360BT 26 페이지.
Pioneer MVH-X360BT에 대해서도 마찬가지입니다: 서비스 매뉴얼 (46 페이지)

페이지 인쇄

Installation

Pull the unit out of the dashboard.

Removing and re-attaching the

front panel

You can remove the front panel to protect your

unit from theft.

For details, refer to Removing the front panel and

Re-attaching the front panel on page 4.

Securing the front panel

The front panel can be secured with the sup-

plied screw.

1 Screw

Installing the microphone

CAUTION

It is extremely dangerous to allow the micro-

phone lead to become wound around the steer-

ing column or shift lever. Be sure to install the

unit in such a way that it will not obstruct driv-

ing.

Notes

! Install the microphone in a position and ori-

entation that will enable it to pick up the

voice of the person operating the system.

! Use separately sold clamps to secure the

lead where necessary inside the vehicle.

When installing the microphone

on the sun visor

Fit the microphone lead into the groove.

1 Microphone lead

2 Groove

Install the microphone clip on the sun

visor.

With the sun visor up, install the microphone

clip. (Lowering the sun visor reduces the voice

recognition rate.)

1 Microphone clip

When installing the microphone

on the steering column

Detach the microphone base from the mi-

crophone clip.

To detach the microphone base from the micro-

phone clip, slide the microphone base.

Installation

1 Microphone

2 Microphone clip

3 Microphone base

Install the microphone on the steering

column.

1 Double-sided tape

2 Install the microphone on the rear side of the

steering column.

Adjusting the microphone angle

Black plate (17,1)

<QRD3221-B>17

Section