Pioneer MVH-X580BS 소유자 매뉴얼 - 페이지 6
{카테고리_이름} Pioneer MVH-X580BS에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer MVH-X580BS 33 페이지.
페이지 인쇄
WARNING
Do not use the unit in standard mode when a speaker system for network mode is connected to the
unit. Do not use the unit in network mode when a speaker system for standard mode is connected to
the unit. This may cause damage to the speakers.
1
Turn the M.C. dial to select the options, then press to confirm.
To proceed to the next menu option, you need to confirm your selection.
Menu Item
Description
Set the clock.
CLOCK SET
1 Turn the M.C. dial to adjust the hour, then press to confirm.
The indicator moves to the minute setting automatically.
2 Turn the M.C. dial to adjust the minute, then press to confirm.
Switch between two operation modes: the 2-way network mode
SPEAKER MODE
(NETWORK) and the standard mode (STANDARD) according to
[STANDARD],
the connections you have established. For details on operation
[NETWORK]
modes, see page 17.
After selecting the appropriate mode, turn the M.C. dial to
select [YES], then press to confirm.
• You cannot complete the setup menu without setting the
[SPEAKER MODE].
• Once the speaker mode is set, this setting cannot be changed
unless the default settings of this product are restored. Restore
the default settings to change the speaker mode setting (refer
to SYSTEM RESET on page 6).
2
[QUIT :YES] appears when all the settings have been made.
To return to the first item of the setup menu, turn the M.C. dial to select [QUIT :NO],
then press to confirm.
3
Press the M.C. dial to confirm the settings.
NOTE
[CLOCK SET] can be made at any time. See page 22 for more details.
Canceling the demonstration display (DEMO OFF)
1
Press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [SYSTEM], then press to confirm.
3
Turn the M.C. dial to select [DEMO OFF], then press to confirm.
4
Turn the M.C. dial to select [YES], then press to confirm.
6
En
INITIAL settings
1
Press and hold SRC/OFF until the unit turns off.
2
Press the M.C. dial to display the main menu.
3
Turn the M.C. dial to select [INITIAL], then press to confirm.
4
Turn the M.C. dial to select an option, then press to confirm.
NOTE
The options vary depending on the unit.
Menu Item
Description
Select the USB port you use to connect a USB device/iPod. The
ACTIVE USB
USB port you do not select can be used for charging.
[FRONT], [REAR]
• When the setting is changed, [USB AUTO] (page 23) is
automatically performed if [USB AUTO] is set to [ON].
Select when there is a full-range speaker connected to the rear
REAR-SP
speaker output leads.
[FUL]
[SW]
Select when there is a subwoofer connected directly to the rear
speaker output leads without any auxiliary amplifier.
Select to perform the auto TA and EQ function using the
AUTO TA & EQ
microphone supplied with the device (page 18).
Select [SYSTEM INFO] to confirm the latest system information
SYSTEM UPDATE
on the unit.
[SYSTEM INFO], [S/
Select [S/W UPDATE] to update the unit to the latest software
W UPDATE]
and initialize the unit settings. For details on the latest software
and updating, visit our website.
Select to initialize the SiriusXM settings.
SXM RESET
[YES], [CANCEL]
Select [YES] to initialize the unit settings. The unit will be
SYSTEM RESET
restarted automatically.
[YES], [CANCEL]
(Some of the settings may be retained even after resetting the
unit.)