Pioneer Super Tuner IIID DEH-P6200BT 운영 매뉴얼 - 페이지 24

{카테고리_이름} Pioneer Super Tuner IIID DEH-P6200BT에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer Super Tuner IIID DEH-P6200BT 49 페이지. Cd receiver
Pioneer Super Tuner IIID DEH-P6200BT에 대해서도 마찬가지입니다: 설치 매뉴얼 (8 페이지)

페이지 인쇄
Pioneer Super Tuner IIID DEH-P6200BT 운영 매뉴얼
03
Select an XM band.
1 Press
/
! Band can be selected from
.
Selecting a channel (step by step)
1 Push
left or right.
! If you push and hold
can increase or decrease the channel number
continuously.
! You can also perform tuning from a desired
channel category. (Refer to Selecting a chan
nel from a channel category on this page.)
Switching the XM display
1 Press and hold
Operations are the same as those of the tuner.
(Refer to Storing and recalling stations on page
11.)
When using the optional remote control, you
can select the channel directly by entering the
desired channel number.
1 Press
.
The channel number input display appears.
2 Press
to
to enter the desired channel number.
! You can cancel the input number by pressing
.
3 Press
.
The channel of the entered number is selected.
! After entering the number input mode, if you
do not perform an operation within about
eight seconds, the mode is automatically can
celed.
24
En
.
,
or
left or right, you
/
/
.
Selecting the channel select mode
1 Press
/
repeatedly to select the desired
channel select setting.
(channel number select setting)
(channel category select setting)
After selecting, perform the following proce
dures to set the function.
(channel select mode setting)
You have two methods for selecting a channel: by
number and by category. When selecting by number,
channels in any category can be selected. Select by
category to narrow your search down to only chan
nels in a particular category.
1 Press
to display the setting mode.
2 Turn
to select the desired setting.
(channel number select setting)
(channel category select setting)
Note
Operation is complete even if the menu is can
celled before being confirmed.
Refer to Selecting the channel select mode on
this page or
setting) on this page.
(channel select mode