Pioneer Super Tuner IIID DEH-P7100BT 설치 매뉴얼 - 페이지 11
{카테고리_이름} Pioneer Super Tuner IIID DEH-P7100BT에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer Super Tuner IIID DEH-P7100BT 43 페이지. Cd rds receiver
Pioneer Super Tuner IIID DEH-P7100BT에 대해서도 마찬가지입니다: 보충 설명서 (2 페이지), 브로셔 (9 페이지), 설치 매뉴얼 (7 페이지), 빠른 시작 매뉴얼 (9 페이지)
페이지 인쇄
Installation
DIN Front-mount
Installation with metal strap and
screws
1. Insert the mounting sleeve into the
dashboard.
• When installing in a shallow space, use a
supplied mounting sleeve. If there is enough
space behind the unit, use factory supplied
mounting sleeve.
2. Secure the mounting sleeve by using
a screwdriver to bend the metal tabs
(90°) into place.
3. Install the unit.
Use commercially available parts when
installing.
Screw
Screw
(M4 × 8)
• Make sure that the unit is installed securely in
place. Unstable installation may cause this unit to
malfunction, such as sound skip.
Nut
Filrewall or metal support
Metal strap
Removing the Unit
1. Insert the supplied extraction keys
into both sides of the unit until they
click into place.
2. Pull the unit out of the dashboard.
DIN Rear mount
1. Determine the appropriate position
where the holes on the bracket and
the side of the unit match.
2. Tighten two screws on each side.
• Use either truss screws (5 mm × 8 mm)
or flush surface screws (5 mm × 9 mm),
depending on the shape of screw holes in the
bracket.
Factory radio mounting bracket
Screw
Dashboard or
Console
11