Pioneer Super Tuner IIID DVH-P5000MP 설치 매뉴얼 - 페이지 2
{카테고리_이름} Pioneer Super Tuner IIID DVH-P5000MP에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer Super Tuner IIID DVH-P5000MP 8 페이지. 2004 mobile entertainment systems
Pioneer Super Tuner IIID DVH-P5000MP에 대해서도 마찬가지입니다: 소유자 매뉴얼 (34 페이지), 사용자 설명서 (24 페이지), 운영 매뉴얼 (4 페이지)
페이지 인쇄
Connecting the Units
Power cable connection
IP-BUS input (Blue)
Optical input
This product
Rear audio output
(Refer to Fig. 4 and Fig. 6.)
Antenna jack
Multi-CD player
IP-BUS cable
(sold separately)
Refer to Fig. 3 – Fig. 6.
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any
connections.
Yellow
Fuse holder
To terminal always supplied
with power regardless of
ignition switch position.
Orange/white
Fuse resistor
To lighting switch terminal.
Red
Fuse resistor
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Black (ground)
To vehicle (metal) body.
Connecting the Units
Connection method
1.
Clamp the lead.
2. Clamp firmly with
needle-nosed
pliers.
Note
• The position of the parking brake switch depends
on the vehicle model. For details, consult the
vehicle Owner's Manual or dealer.
Light green
Used to detect the ON/OFF status of the parking brake.
This lead must be connected to the power supply side of the
parking brake switch.
Power supply side
Parking brake
switch
Ground side
Blue/white
To system control terminal of the power amp
or Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
Gray
White
+
+
Front speaker
Front speaker
≠
≠
Gray/black
White/black
Left
Right
Green
Violet
+
+
Rear speaker
Rear speaker
≠
≠
Green/black
Violet/black
With a 2 speaker system, do not connect anything
to the speaker leads that are not connected to speakers.
When you connect separately sold multi-channel processor
(DEQ-P7000) to this unit, do not connect anything to the
speaker leads and system remote control (blue/white).
Connecting the Units
Connecting to separately sold power amp
15 cm (5-7/8 in.)
Front output
(FRONT OUTPUT)
15 cm (5-7/8 in.)
Subwoofer output
or non fading output
(SUBWOOFER OUTPUT or
NON-FADING OUTPUT)
Rear audio output
(Refer to Fig. 4 and Fig. 6.)
Optical input
This product
Antenna jack
(Refer to Fig. 2.)
System remote control
IP-BUS input (Blue)
(Refer to Fig. 2.)
When you connect separately sold multi-channel
processor (DEQ-P7000) to this unit, do not connect
anything to the speaker leads and system remote
control (blue/white).
Note
When you connect DEQ-P7000 to this unit, separately
sold power amp must be connected to DEQ-P7000.
Note
Change the initial setting of this product (refer to the
Operation Manual). The subwoofer output of this unit
is monaural.
Fig. 2
Connecting the Units
Power amp
(sold separately)
Connecting cords
with RCA pin plugs
(sold separately)
Power amp
(sold separately)
Use this for connections when
you have the separately available
amplifier.
Blue/white
To system control terminal of the
power amp or Auto-antenna relay
control terminal
(max. 300 mA 12 V DC).
System remote control
Subwoofer
Subwoofer
+
+
≠
≠
Left
Right
Front speaker
Front speaker
+
+
≠
≠
Fig. 3