Pioneer Super Tuner IIID+ AVH-P7800DVD 설치 매뉴얼 - 페이지 18
{카테고리_이름} Pioneer Super Tuner IIID+ AVH-P7800DVD에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer Super Tuner IIID+ AVH-P7800DVD 38 페이지. Owner's manual
Pioneer Super Tuner IIID+ AVH-P7800DVD에 대해서도 마찬가지입니다: 소유자 매뉴얼 (34 페이지), 설치 매뉴얼 (42 페이지)
페이지 인쇄
Installation
2. Install the unit into the dash-
board. (Fig. 15)
After inserting the holder into the
dashboard, then select the appropriate
tabs according to the thickness of the
dashboard material and bend them.
(Install as firmly as possible using the
top and bottom tabs. To secure, bend
the tabs 90 degrees.)
Dashboard
182
53
Holder
Side bracket
Screw (2 × 3 mm)
3. After installing the unit into the
dashboard, attach the frame.
(Fig. 16)
When attaching the frame, place the
narrow side of the frame downward.
17
Rubber bush
Screw
Fig. 15
Frame
Fig. 16
DIN Rear-mount
Installation using the screw holes on
the side of the unit
• Fastening the unit to the factory
radio mounting bracket. (Fig.
17) (Fig. 18) (Fig. 19)
Select a position where the screw holes
of the bracket and the screw holes of
this product become aligned (are fit-
ted), and tighten the screws at 2 places
on each side. Use any of binding
screws (4 × 3 mm), binding screws (5
× 6 mm) or flush surface screws (5 × 6
mm), depending on the shape of the
screw holes in the bracket.
*1 Use binding screws (4 × 3 mm) only.
* 1
* 1
* 1
* 1
Fig. 17