Pioneer X-CM31-R 사용 설명서 - 페이지 26

{카테고리_이름} Pioneer X-CM31-R에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer X-CM31-R 36 페이지. Cd receiver system

페이지 인쇄

Using the tuner

Information provided by RDS

Each time the RDS DISPLAY is pressed, the display will switch

as follows:

STANDBY/ON



iPod

USB

AUDIO IN/LINE

TV OUT

CLOCK/TIMER

CLEAR

REPEAT

DISPLAY

TUNE+

Station name (PS)

Frequency

When tuning in to a station other than an RDS station or to an

RDS station which sends weak signal, the display will change

in the following order:

Using the Auto Station program

Memory (ASPM)

Whilst in the ASPM operation mode, the tuner will

automatically search for new RDS stations. Up to 30 stations

can be stored.

If you have already stored some stations in memory, the

number of new stations you can store will be less.

Press TUNER on the remote control.

Press and hold down RDS ASPM on the

remote control.

After "ASPM" has flashed for about 4 seconds, scanning will

start (87.5 - 108 MHz).

After scanning, the number of stations stored in memory will

be displayed for 4 seconds, and then "END" will appear for 4

seconds.

To stop the ASPM operation before it is

complete:

Press  whilst it is scanning for stations. The stations which

are already stored in memory will be kept there.

OPEN/CLOSE

DISPLAY

FOLDER



TUNE+

TUNER

SLEEP

ENTER

EQUALIZER

MEMORY

/PROGRAM

P.BASS

PRESET

VOLUME

TUNE–

BASS/TREBLE

MUTE

RANDOM

–



DIMMER









FOLDER

RDS

ST/MONO

ASPM

PTY

DISPLAY

DAB

SCAN ENTER

DISPLAY

Programme type (PTY)

Radio text (RT)

No RDS

FM 98.80 MHz

Note

• If the same station is broadcasting on different

frequencies, the strongest frequency will be stored in

memory.

• Any station which has the same frequency as the one

stored in memory will not be stored.

• If 30 stations have already been stored in memory, the

scan will be aborted. If you want to redo the ASPM

operation, erase the preset memory.

• If no station have been stored in memory, "END" will

appear for about 4 seconds.

• If the RDS signals are very weak, station names may not

be stored in memory.



• The same station name can be stored in different

channels.

• In a certain area or during certain time periods, the

station names may temporarily be different.

Notes for RDS operation

If any of the following events occur, it does

not mean that the unit is faulty:

• "PS", "No PS" and a station name appear alternately,

and properly.

• If a particular station is not broadcasting properly or a

station is conducting tests, the RDS reception function

may not work properly.

• When you receive an RDS station whose signal is too

weak, information like the station name may not be

displayed.

• "No PS", "No PTY" or "No RT" will flash for about 5

seconds, and then the frequency will be displayed.

Notes for radio text:

• The first 8 characters of the radio text will appear and

then they will scroll across the display.

• If you tune in to an RDS station which is not

broadcasting any radio text, "No RT" will be displayed

when you switch to the radio text position.

• Whilst radio text data is received or when the text

contents change, "RT" will be displayed.