Pioneer X-CM56 사용 설명서 - 페이지 21

{카테고리_이름} Pioneer X-CM56에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer X-CM56 38 페이지. Cd receiver system
Pioneer X-CM56에 대해서도 마찬가지입니다: 사용 설명서 (40 페이지)

페이지 인쇄

USB playback

Chapter 6:

USB playback

Playing USB storage devices

It is possible to listen to two-channel audio using the USB

interface with MP3 files on the front of this receiver.

• Pioneer does not guarantee that any file recorded on a

USB storage device will play or that power will be supplied

to a USB storage device. Also note that Pioneer will accept

no responsibility whatsoever for loss of files on USB

storage devices caused by connection to this unit.

• For details about MP3, see page 35.

Press USB as the input source.

"USB" is shown on the main display.

Connect the USB storage device.

• This receiver does not support a USB hub.

USB storage device

(commercially available)

When the recognition is completed, press

/ to select the folder where the music file is

stored ([ ]), then press

• MP3 track data is called "music file" and the location

they are stored is called a "folder" in this document.

• Repeat this step if there are other folders inside the

selected folder.

• To return to the previous folder, press

Press /

to select the music file ([ ]), and

then press 1; or ENTER.

• Once play starts, only music files inside the same folder

can be played continuously.

• For details about the basic operations, see page 19.

• When changing to a different input source, stop the

USB memory playback first, before changing.

• Turn the power off before removing the USB storage device.

or ENTER.



Note

• This unit may not recognize a USB storage device, play files

or supply power to a USB storage device. For details, see

When a USB storage device is connected on page 33.

• When a USB storage device is not playing and the unit has

not been operated for 20 minutes or more, the power will

automatically turn off. In this case it is required that the

Auto power off is switched to ON (page 36).

Repeat play

Repeat play can play one track, all tracks or a programmed

sequence continuously.

To repeat one track:

Press

repeatedly until "REPEAT ONE" appears. Press

ENTER.

To repeat all tracks:

Press

repeatedly until "REPEAT ALL" appears. Press

ENTER.

To cancel repeat play:

Press

repeatedly until "REPEAT OFF" appears. Press

ENTER.

Note

• After performing repeat play, be sure to press ∫. Otherwise,

the file of USB storage device will play continuously.

• During repeat play, random play is not possible.

Random play

The file of USB storage device can be played in random

order automatically.

To random play all tracks:

Press RANDOM repeatedly until "RANDOM ON" appears.

Press ENTER.

To cancel random play:

Press RANDOM repeatedly until "RANDOM OFF" appears.

Press ENTER.

Note

• If you press the 9 during random play, you can move

to the track selected next by the random operation.

• In random play, the unit will select and play tracks

automatically. (You cannot select the order of the tracks.)

• During random play, repeat play is not possible.

Switch the display contents

This unit can switch the information recorded in the USB

storage device. For details, see Switch the display contents

on page 20.