Pioneer X-CM66D 사용 설명서 - 페이지 34

{카테고리_이름} Pioneer X-CM66D에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer X-CM66D 39 페이지. Cd receiver system

페이지 인쇄

Additional information

When the Bluetooth wireless technology device is connected or operated

Problem

The Bluetooth wireless technology device cannot be connected or

operated.

Sound from the Bluetooth wireless technology device is not emitted

or the sound is interrupted.

Pairing cannot be performed using the NFC function.

Remedy

Check that no object that emits electromagnetic waves in the 2.4

GHz band (microwave oven, wireless LAN device or Bluetooth

wireless technology apparatus) is near the unit. If such an object is

near the unit, set the unit far from it. Or, stop using the object

emitting the electromagnetic waves.

Check that the Bluetooth wireless technology device is not too far

from the unit and that obstructions are not set between the

Bluetoothwireless technology device and the unit. Set the

Bluetooth wireless technology device and the unit so that the

distance between them is less than about 10 m* and no

obstructions exist between them.

* The distance given is to be used as a rough guide. The actual

allowable distance between devices may vary depending on

conditions in the surrounding environment.

The Bluetooth wireless technology device may not be set to the

communication mode supporting the Bluetooth wireless

technology. Check the setting of the Bluetooth wireless technology

device.

Check if this unit is connected with a Bluetooth wireless

technology device with an input source other than Bluetooth

selected. Perform paring procedure after selecting Bluetooth as

the input source.

Check the device to be connected support NFC.

Ensure that the NFC function on the device you are trying to

connect is turned on.

If Network Standby is not set to ON, this unit cannot pair with a

device when this unit is in standby mode. Check if Network

Standby is set to ON.

When pairing devices, move the NFC area (page 6) on this unit

close to where the NFC antenna on the device to be paired. For

the NFC antenna position on an NFC-equipped smartphone,

refer to the manual supplied with the NFC-equipped smartphone.

Use a compatible device with Android OS 4.1 or later.

This may not operate properly, depending on the smartphone or

tablet device.

Check that "Pairing" displays on the front panel display when an

NFC-equipped smartphone is held over this unit. If it is not

displayed, the NFC-equipped smartphone is not recognized by this

unit. Hold the NFC antenna on the NFC-equipped smartphone

close to the NFC area of this unit (page 6). If the NFC-equipped

smartphone is in a case, remove the case as necessary.