Pioneer X-HM71-K 사용 설명서 - 페이지 26

{카테고리_이름} Pioneer X-HM71-K에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer X-HM71-K 42 페이지. Network cd receiver system
Pioneer X-HM71-K에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (33 페이지)

페이지 인쇄

Connecting using PIN Input

Press NETWORK  SETUP. Select Network Setting 

WPS  PIN Input, then press ENTER.

Use / to select the access point which you want to

connect, then press ENTER.

Available Wireless Networks

001XXXXXX

002XXXXXX

003XXXXXX

Confirm the PIN code of this receiver, then press ENTER.

The PIN code of this receiver is shown on the display.

You must check this PIN code to connect to the network.

88192420

[ENTER]

Start

Within 2 minutes after closing the PIN Code message,

input the PIN Code to the access point selected in step 2.

The connection success or failure is displayed on the

display. The PIN Code input method differs depending on

the LAN device used. For details, consult the operating

instructions accompanying your LAN device.

Connecting to a router without WPS-PBC

function

This section describes how to set the network connection

using Safari browser on a Macintosh computer.

Be sure your computer is equipped with wireless LAN

function. Settings can be performed from the Web browser of

the computer.

Be sure the LAN cable is not connected to the receiver.

Plug the power cord into an AC outlet. Press STANDBY/

ON.

Press NETWORK  SETUP on the remote control.

Select Network Setting  Network Configuration 

Wireless  Web Control.

Select Start  OK.

The receiver restarts. Change settings on Web Control on

your computer.

Select Pioneer Setup (this receiver) in the available

wireless network connection of your computer.

SSID is displayed as Pioneer Setup:xxxxxx. "xxxxxx" is the

lower three bytes of the MAC address.

You can change this receiver's network settings via Safari

browser.

000001

000002

000003

Note

•

This setting for the network has been confirmed for Mac OS

X 10.7 and Safari 5.1.

Launch Safari on your computer.

Press Bookmark icon. Click Bonjour list (a), and then

select this receiver's name (Friendly Name) (b) in

Bookmark.

If Bonjour list is not displayed, access the IP address

http://192.168.1.1/ from Safari.

If you use X-HM71 or X-HM81, XC-HM71 or XC-HM81 is

displayed as the receiver's name.

Click Network Configuration. Select Auto and then press

OK.

Setup the network settings manually and then press

Apply.

If SSID is not displayed, return to step 9 and select

Manual.

XX.XX

:xxxxxx

The receiver restarts and the new network settings are applied

to the receiver.

Internet radio