Pioneer X-HX5000 작동 지침 - 페이지 9
{카테고리_이름} Pioneer X-HX5000에 대한 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer X-HX5000 36 페이지. Cd/receiver system
페이지 인쇄
1
Connect speakers to CD/receiver
1
Connect the speaker cords to the
speaker terminals of the CD/receiver.
Shift the tab to open the speaker terminal,
insert a wire from the speaker cord, then set
the tab back to close the speaker terminal.
One wire of the two-wire speaker cord is
marked with a line. Insert this wire into the
negative (·) terminal, and the other into
the positive (ª) terminal.
After closing the terminals, pull gently on
each wire to make sure that it is securely
connected.
For optimum stereo playback
If you want to ensure optimum stereo effects
during playback, be sure to place the left and
right speakers in similar, balanced positions (at
similar height or distance from the wall, etc.).
Also, make sure that the right and left speakers
are connected to the corresponding right and
left terminal pairs.
R
Connect the
right
speaker to
these
terminals.
L
Connect the
left speaker
to these
terminals.