Pioneer XC-P01-K 사용 설명서 - 페이지 10
{카테고리_이름} Pioneer XC-P01-K에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer XC-P01-K 30 페이지. Cd receiver system/ampli-tuner cd
Pioneer XC-P01-K에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (33 페이지), 빠른 시작 매뉴얼 (33 페이지)
페이지 인쇄
Connecting your equipments
Connecting your equipments
Before making or changing the connections, turn off the power and disconnect the power cord from the AC outlet.
Stereo receiver
Right speaker
Monaural mini-plug
cord (without resistor)
To CONTROL OUT
socket of other
Pioneer component
Aerial connection
Supplied FM aerial (XC-P01), DAB/FM aerial (XC-
P01DAB):
Connect the supplied FM aerial wire or DAB/FM aerial wire to
the FM socket or DAB/FM socket, and position the aerial wire
in the direction where the strongest signal can be received.
10
En
XC-P01
ANTENNA
FM aerial
XC-P01DAB:
Connect the DAB/FM
aerial to the DAB/FM
socket.
External FM aerial:
Use an external FM aerial (75 ohms coaxial cable) for better
reception. When an external FM aerial is used, disconnect
the supplied FM aerial wire.
Note
• Placing the aerial on the unit or near the AC power lead
may cause noise pickup. Place the aerial away from the
unit for better reception.
Left speaker
AC IN
Wall socket
(AC 220 V to 230 V, 50 Hz)
Speaker connection
Use speakers with an impedance of 4 ohms as lower
impedance speakers can damage the unit.
1 Loosen the knobs of the speaker output terminals.
2 Insert the speaker cable wires into each of the terminal
post holes (positive (+) cable to the red knob, and
negative (–) cable to the black knob), then tighten the
knobs.