Pioneer XW-DV535W 작동 지침 - 페이지 38

{카테고리_이름} Pioneer XW-DV535W에 대한 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer XW-DV535W 47 페이지. Dvd/cd receiver; speaker system; digital; wireless speaker system

페이지 인쇄

Additional information

AC adaptor and power cord caution

• Do not leave the power cord near heating

equipment. The coating of the cord may

melt, which could lead to fire and/or

electrocution.

• Make sure to grasp the body of the AC

adaptor when removing it from the power

outlet. If you pull the power cord, it may

become damaged which could lead to fire

and/or electrocution.

• Do not attempt to plug in or remove the AC

adaptor with wet hands. This may result in

electrocution.

• Insert the prongs of the AC adaptor all the

way into the power outlet. If the connection

is incomplete, heat may be generated

which could lead to fire. Furthermore,

contact with the connected prongs of the

adaptor may result in electrocution.

• Do not insert the AC adapter into a power

outlet where the connection remains loose

despite inserting the prongs all the way

into the outlet. Heat may be generated

which could lead to fire. Consult with the

retailer or an electrician regarding replace-

ment of the power outlet.

Moving the wireless speaker

If you need to move the wireless speaker, first

press POWER on the top panel to turn the unit

off, then unplug the power cord.

Radio wave reflections

The radio waves received by the wireless

speaker include the radio wave coming directly

from the transmitter (direct wave) and waves

coming from various directions due to

reflections by walls, furniture and building

(reflected waves). The reflected waves (due to

Note

1 • If there is something obstructing the path between the transmitter and the wireless speaker (such as a metal door, concrete

wall, or insulation containing tinfoil), you may need to change the location of your system to prevent signal noise and interrup-

tions.

• If the transmitter is used near A/V equipment with an antenna input terminal, such as a TV, VCR, BS tuner or CS tuner, you

may experience noise interference on a TV near the transmitter. In such cases, place the transmitter at a larger distance from

the antenna input terminal of the A/V equipment.

obstacles and reflecting objects) further

produce a variety of reflected waves as well as

variation in reception condition depending on

locations. If the audio cannot be received

properly due to this phenomenon, try moving

the location of the wireless speaker a little. Also

note that audio may be interrupted due to the

reflected waves when a person crosses or

approaches the space between the transmitter

and wireless speaker.

Radio wave caution

This wireless speaker system uses a 2.4GHz

radio wave frequency, which is a band used by

other wireless systems (see list below). To

prevent noise or interrupted communication,

do not use this system nearby such devices, or

make sure these devices are switched off

during use. You can also try switching the

channel on the transmitter (see Transmitter on

page 32) for better reception.

• Cordless phones

• Cordless FAX units

• Wireless broadband routers

• Wireless AV equipment

• Microwave-based health aids

• Microwave ovens

• Wireless controllers for game systems

• Bluetooth equipment

• Some baby monitors

Other, less common, equipment that may

operate on the same frequency:

• Anti-theft systems

• Warehouse logistic management systems

• Amateur radio stations (HAM)