Pioneer AVH-190DVD 운영 매뉴얼 - 페이지 20

{카테고리_이름} Pioneer AVH-190DVD에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer AVH-190DVD 38 페이지. Dvd rds av receiver
Pioneer AVH-190DVD에 대해서도 마찬가지입니다: 소유자 매뉴얼 (49 페이지), 빠른 시작 매뉴얼 (33 페이지), 소유자 매뉴얼 (45 페이지), 설치 매뉴얼 (45 페이지)

페이지 인쇄

Bluetooth audio

player

Selects a file from the list.

 Selecting files from the file name list on page 20

p By pressing the

button, you can also skip files

forwards or backwards.

p By pressing and hold the

perform fast reverse or fast forwards.

p Before using the Bluetooth audio player, register and con-

nect the device to this product.

 Registering your Bluetooth devices on page 8

p Depending on the Bluetooth device connected to this prod-

uct, the available operations with this product may be limited

or differ from the descriptions in this manual.

p While you are listening to songs on your Bluetooth device,

please refrain from operating the phone function as much as

possible. If you try operating, the signal may cause noise for

song playback.

p When you are talking on the Bluetooth device connected to

this product via Bluetooth, it may pause playback.

Starting procedure

1 Display the "System" setting screen.

2 Touch [AV Source Settings].

3 Confirm that "Bluetooth Audio" is turned on.

4 Press

5 Touch [Bluetooth Audio].

Selecting files from the file

name list

p This function may not be available depending on some

Bluetooth device.

1 Touch

2 Touch a file or a folder on the list to play back.

AUX source

AUX

button, you can also

Switches between the screen to

operate video les and that to

operate music les.

is only available when there are both audio and video

files on the auxiliary equipment.

p A Mini-jack AV cable (CD-RM10) (sold separately) is required

for connection.

 For details on how to connect the external video compo-

nent, refer to the installation manual.

CAUTION

For safety reasons, video images cannot be viewed while your

vehicle is in motion. To view video images, stop in a safe place

and apply the handbrake.

Starting procedure

You can display the video image output by the device connected

to video input.

1 Display the "System" setting screen.

2 Confirm that "AUX Input" is turned on.

3 Press

Hides the touch panel keys.

To display again the keys,

touch anywhere on the screen.

6/10

Full

4 Touch [AUX].

The image is displayed on the screen.

Setting the video signal

When you connect this product to an AUX equipment, select the

suitable video signal setting.

p You can operate this function only for the video signal input

into the AUX input.

1 Display the "Video Setup" screen.

2 Touch [Video Signal Setting].

3 Touch [AUX].

4 Touch the item you want to set.

The following items are available:

Auto (default), PAL, NTSC, PAL-M, PAL-N, SECAM.