Pioneer AVH-190DVD 설치 매뉴얼 - 페이지 4

{카테고리_이름} Pioneer AVH-190DVD에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer AVH-190DVD 45 페이지. Dvd rds av receiver
Pioneer AVH-190DVD에 대해서도 마찬가지입니다: 소유자 매뉴얼 (49 페이지), 빠른 시작 매뉴얼 (33 페이지), 운영 매뉴얼 (38 페이지), 소유자 매뉴얼 (45 페이지)

페이지 인쇄

Connection

Violet: Rear right +

Violet/black: Rear right –

k ISO connector

In some vehicles, the ISO connector may be divided into two.

In this case, be sure to connect to both connectors.

The position of the handbrake switch depends on the vehicle

model. For details, consult the vehicle Owner's Manual or

dealer.

When a subwoofer is connected to this product instead of

a rear speaker, change the rear output setting in the initial

setting. The subwoofer output of this product is monaural.

When using a subwoofer of 70 W (2 Ω), be sure to connect

the subwoofer to the violet and violet/black leads of this unit.

Do not connect anything to the green and green/black leads.

Parking Brake

1 If "Light green" cable is connected to hand-

brake switch, video image on the display will

be controlled by this function.

2 The monitor displays the black screen with

warning information to prevent the driver

watching video contents during driving.

Power amp (sold separately)

Without internal amp

Important

The speaker leads are not used when this connection is in

use.

With internal amp

Important

Front speaker and Rear speaker signals are output from the

speaker leads when this connection is in use.

1 System remote control

Connect to Blue/white cable.

2 Power amp (sold separately)

3 Connect with RCA cable (sold separately)

4 To Rear or subwoofer output

Connect a cable according to the preout setting.

5 Rear speaker or subwoofer

6 To Front output

7 Front speaker

8 Subwoofer

You can change the RCA output of the subwoofer depending

on your subwoofer system.

The subwoofer output of this product is monaural.

iPod / iPhone

For details on how to connect an external device using a

separately sold cable, refer to the manual for the cable.

For details concerning the connection, operations and

compatibility of iPhone, refer to Operation Manual.

iPod / iPhone with Lightning

connector

Connecting via the USB port

The USB interface cable for iPod / iPhone (CD-IU52) (sold sepa-

rately) is required for the connection.

1 USB port

2 USB cable 1.5 m

3 USB interface cable for iPod / iPhone (CD-IU52) (sold

separately)

4 iPhone with Lightning connector

iPod / iPhone with 30-pin

connector

Connecting via the AUX input

The USB interface cable for iPod / iPhone (CD-IU201V) (sold

separately) is required for the connection.

1 USB port

2 AUX input

3 USB cable 1.5 m

4 USB interface cable for iPod / iPhone (CD-IU201V) (sold

separately)

5 iPhone with 30-pin connector