Pioneer AVH-290BT 운영 매뉴얼 - 페이지 23

{카테고리_이름} Pioneer AVH-290BT에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer AVH-290BT 38 페이지. Dvd rds av receiver
Pioneer AVH-290BT에 대해서도 마찬가지입니다: 소유자 매뉴얼 (49 페이지), 빠른 시작 매뉴얼 (33 페이지), 소유자 매뉴얼 (45 페이지), 설치 매뉴얼 (45 페이지)

페이지 인쇄
Pioneer AVH-290BT 운영 매뉴얼
System settings
5 Touch
,
,
,
to adjust.
 The adjustments of "Brightness", "Contrast"
and "Dimmer" are stored separately when your
vehicle's headlights are off (daytime) and on
(nighttime).
 "Brightness" and "Contrast" are switched auto-
matically depending on whether the vehicle's
headlights are on or off.
 "Dimmer" can be changed the setting or the time
to switch it to on or off.
 Setting the dimmer on page 22
 The setting contents can be memorised
separately.

Audio adjustments

Displaying the "Audio" setting
screen
1 Press
.
2 Touch
, and then
.
The "Audio" setting screen appears.

Using fader/balance adjustment

p This function is available when "Rear Speaker Output" is
set to "Full", and "Preout" is set to "Rear".
1 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 23
2 Touch [Fader/Balance].
3 Touch
or
to adjust the front/rear speaker
balance.
4 Touch
or
to adjust the left/right speaker
balance.
p "Front15" to "Rear15" is displayed as the front/rear speaker
balance moves from the front to rear.
p "Left15" to "Right15" is displayed as the left/right speaker
balance moves from the left to right.
p The default setting is "F/R 0 L/R 0".
 You can also set the fader/balance by touching
the point on the displayed table.

Using balance adjustment

p This function is available when "Rear Speaker Output" and
"Preout" are set to "Subwoofer Settings".
1 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 23
2 Touch [Balance].
3 Touch
or
to adjust the left/right speaker
balance.
p "Left15" to "Right15" is displayed as the left/right speaker
balance moves from the left to right.
p The default setting is "L/R 0".
 You can also set the fader/balance by dragging
the point on the displayed table.

Adjusting source levels

SLA (source level adjustment) lets you adjust the volume level of
each source to prevent radical changes in volume when switch-
ing between sources.
p Settings are based on the FM tuner volume level, which
remains unchanged.
p This function is not available when the FM tuner is selected
as the AV source.
1 Compare the FM tuner volume level with the
level of the source you want to adjust.
2 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 23
3 Touch [Source Level Adjuster].
4 Touch
or
to adjust the source volume.
p If you directly touch the area where the cursor can be moved,
the SLA setting will be changed to the value of the touched
point.
p "+4" to "–4" is displayed as the source volume is increased
or decreased.
p The default setting is "0".

Adjusting loudness

This function compensates for deficiencies in the low-frequency
and high-frequency ranges at low volume.
p This function is not available while you make or receive a call
using the hands-free function.
1 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 23
2 Touch [Loudness].
3 Touch the item.
The following items are available:
Off (default), Low, Mid, High.

Using the subwoofer output

This product is equipped with a subwoofer output mechanism,
which can be turned on or off.
1 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 23
2 Touch [Subwoofer] to switch "On" (default) or
"Off".
23