Pioneer AVH-P6400CD 설치 매뉴얼 - 페이지 6

{카테고리_이름} Pioneer AVH-P6400CD에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer AVH-P6400CD 40 페이지. Pioneer avh-p6400: install guide

Connecting the Units

Connecting the power cord (2)

When using this product with a back-up camera, automatic switching to VIDEO video

when the gear shift is moved to the REVERSE (R) position is possible.

Connect the back-up camera to the VIDEO input.

Power cable

Parking brake switch

Note:

• The position of the parking brake

switch depends on the vehicle model.

For details, consult the vehicle

Owner's Manual or dealer.

This product

Fuse resistor

Violet / white

Of the two lead wires connected to the back lamp, connect the one

in which the voltage changes when the gear shift is in the REVERSE

(R) position. This connection enables the unit to sense whether the

car is moving forwards or backwards.

Light green

Used to detect the ON/OFF status of the parking brake.

This lead must be connected to the power supply side

of the parking brake switch.

Power supply side

Ground side

Note:

• When you have completed lead wire connection,

perform VIDEO SETTING correctly while

referring to the Operation Manual.

• It is necessary to set to [BACK UP CAMERA]

in the [VIDEO SETTING] when connecting the

back-up camera.

Connecting method

Clamp the parking

brake switch power

supply side lead.

Clamp firmly with

needle-nosed

pliers.

Fig. 3