Pioneer AVH-X7500BT 펌웨어 업데이트 매뉴얼 - 페이지 3

{카테고리_이름} Pioneer AVH-X7500BT에 대한 펌웨어 업데이트 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer AVH-X7500BT 10 페이지. Dvd receiver
Pioneer AVH-X7500BT에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지)

페이지 인쇄

B. Updating the Firmware on Your Unit

IMPORTANT

Please DO NOT perform this firmware update if the model number of your Pioneer in-dash

multimedia unit is anything other than AVH-X7500BT.

The model number for the AVH-X7500BT is to the right of the 'TRACK UP' button along the

bottom edge of the front panel.

There are two separate firmware updates that must be performed: the PDB software update and

PEH software update.

It is necessary to copy only one update file onto a USB storage device at a time.

USB storage device requirements:

USB specification 2.0 and 128 MB or larger, preferably from a major manufacturer.

Should be blank (should not contain any files) and formatted in FAT32.

Ensure that the update file is located within the root (top) folder of your USB storage device. There

should be no other files within the USB storage device.

While your unit is being updated, DO NOT turn off the system's power and DO NOT touch the

unit's touch panel screen. Failure to heed this warning may result in severe damage to your unit.

DO NOT remove the USB storage device during the firmware update process.

Performing the firmware update will restore all settings to their default values.

Disconnect any external mobile devices that are currently connected to your unit.

BEFORE UPDATING

Updating the firmware of your unit will result in the following changes.

The "Pandora Connect Mode" --- "Wired" , "Bluetooth" options under the setting menu will change

to "Pandora connection" --- " iPhone" , "Android" after the update.

The "RGB Input" --- "iPhone", "NAVI" options under the system setting menu will change to "iPhone

(CD-IU201S)","iPhone (VGA adapter)", and "NAVI" after the updates.

RGB Input can only be set when all of the following conditions are met.

The USB storage device is not connected to USB/iPod input.

No Bluetooth connection.

The source is turned off.