Pioneer DEH-P7400HD 소유자 매뉴얼 - 페이지 18

{카테고리_이름} Pioneer DEH-P7400HD에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer DEH-P7400HD 39 페이지. Cd rds receiver

페이지 인쇄

Section

Operating this unit

! SCAN (cycle through all colors)

! 3 sets of colors (WARM, AMBIENT, CALM)

! CUSTOM (customized illumination color)

Note

For details about colors on the list, refer to Se-

lecting the key color from the illumination color

list on the previous page.

Selecting key and display color from

the illumination color list

You can select the desired colors for the keys

and display of this unit.

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select ILLUMI.

Turn M.C. to display Key & Display and

press to select.

Turn M.C. to select the illumination color.

You can select one option from the following list.

! 27 preset colors (WHITE to ROSE)

! SCAN (cycle through all colors)

! 3 sets of colors (WARM, AMBIENT, CALM)

Notes

! You cannot select CUSTOM in this function.

! Once you select a color in this function, col-

ors on the keys and display of this unit auto-

matically switch to the color you selected.

! For details about colors on the list, refer to

Selecting the key color from the illumination

color list on the previous page.

Customizing the illumination color

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select ILLUMI.

Turn M.C. to display Key or Display. Press

to select.

Press M.C. and hold until the customizing

illumination color setting appears in the dis-

play.

Press M.C. to select the primary color.

R (red)—G (green)—B (blue)

Turn M.C. to adjust the brightness level.

Adjustment range: 0 to 60

# You cannot select a level below 20 for all three of

R (red), G (green), and B (blue) at the same time.

# You can also perform the same operation on

other colors.

Notes

! You cannot create a custom illumination

color when SCAN or a set of colors (WARM,

AMBIENT, or CALM) is selected.

! You can create custom illumination colors

for both Key and Display.

Switching the display indication

and button illumination

Display indication and button illumination can

be switched on or off.

% Press and hold MIX.

Pressing and holding MIX switches the display

indication and button illumination on or off.

# Even if the display indication is turned off, opera-

tion can be conducted. If operation is conducted

while the display indication is off, display will light

up for a few seconds and then turn off again.

Available accessories

Bluetooth Audio

! Only for DEH-P7400HD

If you connect a Bluetooth adapter (e.g. CD-

BTB200) to this unit, you can control Bluetooth

audio players via Bluetooth wireless technology.

! In some countries, CD-BTB200 is not sold on

the market.

Important

! Depending on the Bluetooth audio player

connected to this unit, the available opera-

tions will be limited to the following two lev-

els:

— A2DP profile (Advanced Audio Distribution

Profile): You can only playback songs on your

audio player.

— AVRCP profile (Audio/Video Remote Control

Profile): You can perform playback, pause

playback, select songs, etc.

! Operations may vary depending on the kind

of a Bluetooth audio player.

! Refer to the instruction manual that came

with your Bluetooth audio player as well as

this manual while operating your player on

this unit.

! Information related to a song (such as the

elapsed playing time, song title, song index,

etc.) cannot be displayed on this unit.

! As the signal from your cellular phone may

cause noise, avoid using it when you are lis-

tening to songs on your Bluetooth audio

player.

! When a call is in progress on the cellular

phone connected to this unit via Bluetooth

wireless technology, the sound of the

Bluetooth audio player connected to this unit

is muted.

! Playback continues even if you switch from

your Bluetooth audio player to another

source while listening to a song.

Basic operations

1 Device name

Shows the device name of the connected

Bluetooth audio player (or Bluetooth adapt-

er).

Selecting a track

1 Turn LEVER.

Fast forwarding or reversing

1 Turn and hold down LEVER to the right or left.

Notes

! For details concerning operation, refer to the

Bluetooth adapter's operation manual.

! Even though your audio player does not con-

tain a Bluetooth module, you can still control

it from this unit via Bluetooth wireless tech-

nology. To control your audio player using

this unit, connect a product featuring

Bluetooth wireless technology (available on

the market) to your audio player and connect

the Bluetooth adapter (e.g. CD-BTB200) to

this unit.

Function settings

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select FUNCTION.

Turn M.C. to select the function.

After selecting, perform the following proce-

dures to set the function.