Pioneer DEH-S5100BT 펌웨어 업데이트 지침 - 페이지 5

{카테고리_이름} Pioneer DEH-S5100BT에 대한 펌웨어 업데이트 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer DEH-S5100BT 6 페이지. Audio receivers
Pioneer DEH-S5100BT에 대해서도 마찬가지입니다: 펌웨어 업데이트 지침 (6 페이지), 시스템 펌웨어 업데이트 지침 (7 페이지)

페이지 인쇄

9. After starting, there will be a progress bar while updating.

-> If it shows "ERROR" on the display, try the following:

"ERR->RETRY" Disconnect, then reconnect the USB storage device and press the M.C. dial

update.

10. Wait until the update is complete, which will take about 5 minutes.

-> You will see the following screen if the update has completed successfully.

11. The product will reboot after the update is finished. Do not touch anything even when the screen is

blacked out. After it has finished rebooting, the screen will return to the menu screen.

12. The firmware update is now complete. Your Pioneer Audio Receiver is now ready for use.

Verify that the firmware has been updated

Perform the same procedure for "Displaying the firmware version" to check that the firmware has been

updated.

Procedure:

Start the vehicle engine (in an open, well-ventilated area).

If AV Source is on, press and hold SRC/OFF.

Press M.C. (multi-control) dial to display the "Initial" menu. then press to confirm.

to retry the