Pioneer DEH-X7800DAB 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Pioneer DEH-X7800DAB에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer DEH-X7800DAB 28 페이지.

페이지 인쇄

Turn the M.C. dial to select the mode ([ARTIST], [ALBUM], [GENRE]), then press to

confirm.

The selected song/album will be played after the currently playing song.

NOTE

The selected song/album may be canceled if you use functions other than those from the link play

mode (e.g. fast forward and reverse).

iPod control

You can control the unit via a connected iPod.

The following iPod models are not compatible with this function.

– iPod nano 1st generation, iPod with video

Press BAND/

during playback, then select the control mode.

[CONTROL iPod]: The unit's iPod function can be operated from the connected iPod.

[CONTROL AUDIO]: The unit's iPod function can only be operated by the buttons on

the unit. In this mode, the connected iPod cannot be turned on or off.

NOTES

• Switching the control mode to [CONTROL iPod] pauses song playback. Use the connected iPod to

resume playback.

• The following operations are still accessible from the unit, even if the control mode is set to

[CONTROL iPod].

– Pause, fast forward/reverse, song/chapter selection

• The volume can only be adjusted from the unit.

About MIXTRAX (USB/iPod only)

The MIXTRAX function creates a non-stop mix of your music library, accompanied by

illumination effects. For details on MIXTRAX settings, see page 19.

NOTES

• This function is not compatible with an Android device connected via MTP.

• Depending on the file/song, sound effects may not be available.

• Turn the MIXTRAX function off if the illumination effects it produces interfere with driving.

Press 3/MIX to turn MIXTRAX on/off.

Bluetooth

Bluetooth connection

Important

If three or more Bluetooth devices (e.g. a phone and separate audio player) are connected, they may

not work properly.

Turn on the Bluetooth function of the device.

Press

to display the phone menu.

Turn the M.C. dial to select [BT SETTING], then press to confirm.

Turn the M.C. dial to select [ADD DEVICE], then press to confirm.

The unit starts to search for available devices, then displays them in the device list.

• To cancel searching, press the M.C. dial.

• If the desired device is not in the list, select [RE-SEARCH].

• If there is no device available, [NOT FOUND] appears in the display.

Turn the M.C. dial to select a device from the device list, then press to confirm.

Press and hold the M.C. dial to switch the displayed device information between the

Bluetooth device address and device name.

Select [Pioneer BT Unit] shown in the device display.

Make sure the same 6-digit number appears on this unit and the device, then

select "Yes" on the device.

NOTES

• [DEVICE FULL] appears if the unit has already been paired with three other devices. In this case, delete

one of the paired devices. See [DEL DEVICE] or [GUEST MODE] in the Bluetooth settings (page 9).

• Depending on the device, the PIN code is required in step 7. In this case, input [0000].

TIP

The Bluetooth connection can be also made by detecting the unit from the Bluetooth device. To do so,

[VISIBLE] in the Bluetooth settings needs to be set to [ON]. For details on a Bluetooth device operations,

refer to the operating instructions supplied with the Bluetooth device.

Bluetooth settings

Menu Item

DEVICELIST

Autogoods "130"

Description

Display the list of paired Bluetooth devices. "*" appears on the

device name when the Bluetooth connection is established.