Pioneer Elite SC-87 사용 설명서 - 페이지 3

{카테고리_이름} Pioneer Elite SC-87에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer Elite SC-87 8 페이지. Dolby atmos-enabled speakers setup
Pioneer Elite SC-87에 대해서도 마찬가지입니다: 참조 매뉴얼 (45 페이지), 빠른 시작 매뉴얼 (25 페이지)

페이지 인쇄

Firmware Update continued

CAUTION:

CONFIRM THE FIRMWARE FILES AND APPROPRIATE PROCEDURE ARE FOR THE MODEL YOU ARE

UPDATING. USING THE INCORRECT FILES MAY RENDER THE UNIT INOPERABLE AND REQUIRE

REPAIR.

DO NOT TURN OFF OR DISCONNECT THE POWER CORD FROM THE AVR DURING THE UPDATE

PROCESS!

DO NOT DISCONNECT THE USB STORAGE DEVICE DURING THE UPDATE PROCESS!

1. Using you PC, unzip the downloaded file and copy the two firmware files (*.fw and *.bin) to the root

directory of the USB Storage Device.

2. Follow steps 1 to 5 in the

3. Connect the USB Storage Device to the USB Connector on the front of the receiver and wait for 1 minute.

4. Using the

button, Select "b. Update via USB Memory" and press the ENTER button. The message

"A New file has been found." will be displayed. Confirm the firmware version displayed is the correct one

for the model you are updating.

5. Press the ENTER button to start the update process. It can take up to 20 minutes to complete.

6. When finished, the receiver will automatically turn off.

7. Remove the USB Storage Device.

8. The Firmware Update process is complete.

Check Firmware Version procedure.