Pioneer Elite SC-89 사용 설명서

{카테고리_이름} Pioneer Elite SC-89에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer Elite SC-89 8 페이지. Dolby atmos-enabled speakers setup
Pioneer Elite SC-89에 대해서도 마찬가지입니다: 참조 매뉴얼 (45 페이지), 빠른 시작 매뉴얼 (25 페이지)

페이지 인쇄

Dolby Atmos-enabled Speakers Setup Instructions for

Use this procedure to setup Dolby Atmos-enabled Speakers and update the A/V receiver's firmware using a

USB storage device. If you have any difficulty carrying out these instructions, please call Pioneer's Customer

Support Center toll free in the USA at 1-844-679-5350 for assistance.

The first step is to confirm the AVR's firmware version is 1-290-008-518-121 or newer.

The buttons and connector mentioned in the following procedures are located on the Remote Control or the

AVR's Front Panel as shown in Figure 1.

Check the Firmware Version

1. Turn on the receiver by pressing the

STANDBY/ON

button.

2. If using the Remote, press the MAIN button.

3. Press the HOME MENU button and using the

button, Select "4. System Setup" and

press the ENTER button.

4. Using the

button, Select "g. Other Setup"

and press the ENTER button.

Elite Models SC-85, SC-87, and SC-89

AVR Front Panel

Remote

Figure 1