Pioneer F-208 사용 설명서 - 페이지 8

{카테고리_이름} Pioneer F-208에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer F-208 34 페이지. Fm/am digital-synthesizer tuner
Pioneer F-208에 대해서도 마찬가지입니다: 카탈로그 (10 페이지), 서비스 매뉴얼 (21 페이지)

페이지 인쇄

FRONT PANEL FACILITIES

- RF ATT button

Set this button to on when receiving strong FM signals

(nearby stations) to reduce sound distortion (RF ATT

indicator lights).

Normally, this button should be set to off.

This button does not affect AM reception.

NOTE:

This button's status is preset for each station in station

memory.

= MPX (multiplex) MODE button

Mode changes as follows each time this button is

pressed.

AUTO

This button does not affect AM reception.

AUTO:

"AUTO"is not displayed.

Normally leave in this mode for reception. When a stereo

FM broadcast is received, it will be automatically

reproduced in stereo sound and the STEREO indicator

lights up.

MONO:

MONO indicator lights up.

To receive stereo broadcasts in monaural.

If there is too much noise during stereo reception of a

weak signal, you can reduce the level of noise by

switching to MONO.

NOTES:

¶ This button's status is preset for each station in station

memory.

¶ When the signal level is too weak for reception, sound

output is automatically muted. If sound is muted when

the selected mode is AUTO, switching to MONO lets

you hear the broadcast.

MONO

~ BAND button

The button is used to select either FM or AM reception.

! STATION CALL buttons

Use these buttons to preset stations and to receive the

already preset stations.

These are also used when performing direct access

tuning.