Pioneer GEX-AIRWARE1 XM2GO 사용자 설명서 - 페이지 8
{카테고리_이름} Pioneer GEX-AIRWARE1 XM2GO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer GEX-AIRWARE1 XM2GO 24 페이지. Satellite radio receiver
Pioneer GEX-AIRWARE1 XM2GO에 대해서도 마찬가지입니다: 빠른 매뉴얼 (2 페이지)
페이지 인쇄
Setting Up
Assembly
Insert the battery and assemble your AirWare and its home
stand as shown; plug the AC adaptor into an outlet. Let
the battery charge for at least three hours.
Insert battery
Important! You will need to fully charge your AirWare
battery for at least three hours to have sufficient battery
power for portable use.
Assemble home docking
station
14
Connecting to a stereo
Plug the AC adaptor into an outlet. Connect the home
antenna and connect the line out to either your home
stereo or powered (PC type) speakers.
Receiving the XM signal
Turn your AirWare on by pressing the power button. You
should be able to hear channel 1, the XM Preview
Channel. If you do not, and the screen displays "NO
SIGNAL," try moving your AirWare' s antenna to another
location. Make sure the antenna points south, either
outdoors or through a window. If the "NO SIGNAL"
message persists, refer to "Aiming the home antenna"
(page 30).
Please read the TIP below the illustration for optional
setup and activation procedure information.
Aim antenna
TIP: Establishing a good signal environment in the home or
office setup is highly desirable, but this is not the only way
you can receive the XM signal. As an option, you can refer to
"Using AirWare In Your Vehicle" (page 31) and continue this
setup and activation process with your AirWare installed
in a vehicle.
Connect to stereo
15