Pioneer MVH-291BT 서비스 매뉴얼 - 페이지 3

{카테고리_이름} Pioneer MVH-291BT에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer MVH-291BT 25 페이지. Digital media receiver
Pioneer MVH-291BT에 대해서도 마찬가지입니다: 소유자 매뉴얼 (22 페이지), 소유자 매뉴얼 (20 페이지)

페이지 인쇄

1. SERVICE PRECAUTIONS

1.1 SAFETY PRECAUTIONS

 You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and

should keep the safety during servicing by following the safety instructions described in this manual.

1.2 NOTES ON DISASSEMBLY / ASSEMBLY

 Before disassembling the unit, be sure to turn off the power. Unplugging and plugging the connectors during power-on

mode may damage the ICs inside the unit.

 Please be sure to conduct line process to original status if you make assembling after repair.

1.3 NOTES ON REPLACING PARTS

 Be careful in handling ICs. Some ICs such as MOS type are so fragile that they can be damaged by electrostatic

induction.

 Please be careful of not to apply static charge onto integrated circuits, etc, when you conduct repair work.

Especially, please use soldering iron with its tip grounded.

Also, please use a pair of tweezers with static charge protection capability if there is the possibility of contacting to

device terminals, and avoid the use of metal-made tweezers.

1.4 NOTES ON ADJUSTMENT

 There is not information to be shown in this chapter.

1.5 OTHERS

Notes on soldring

For environmental protection, lead-free solder is used on the printed circuit boards mounted in this unit.

Be sure to use lead-free solder and a soldering iron that can meet specifications for use with lead-free solders for

repairs accompanied by reworking of soldering.

MVH-290BT/XEUC