Pioneer MVH-300EX 매뉴얼 - 페이지 30
{카테고리_이름} Pioneer MVH-300EX에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer MVH-300EX 50 페이지. Rds av receiver
Pioneer MVH-300EX에 대해서도 마찬가지입니다: 설치 매뉴얼 (8 페이지), 설치 매뉴얼 (21 페이지)
페이지 인쇄
[Camera Settings]
A separately sold rear view camera (e.g. ND-BC8) is required for utilizing the rear view
camera function. (For details, consult your dealer.)
▶Rear view camera
This product features a function that automatically switches to the full-screen image of
the rear view camera installed on your vehicle when the shift lever is in the REVERSE (R)
position.
▶Camera for Camera View mode
Camera View can be displayed at all times. Note that with this setting, the camera image
is not resized to fit, and that a portion of what is seen by the camera is not viewable.
To display the camera image, touch [Camera View] on the AV source selection screen
(page 19).
NOTE
To set the rear view camera as the camera for Camera View mode, set [Back Camera Input] to [On]
(page 30).
CAUTION
Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen
image may appear reversed.
• Immediately verify whether the display changes to the rear view camera image when the shift lever is
moved to REVERSE (R) from another position.
• When the screen changes to full-screen rear view camera image during normal driving, switch to the
opposite setting in [Camera Polarity].
• If you touch
while the camera image is displayed, the displayed image turns off temporarily.
Menu Item
[Back Camera Input]
[Off] [On]
[Camera Polarity]
[Battery]
[Ground]
Description
Setting rear view camera activation.
Setting the polarity of the rear view camera.
The polarity of the connected lead is positive.
The polarity of the connected lead is negative.
NOTE
This function is available when [Back Camera Input] is set to [On].
- 30 -