Pioneer VSX91TXH - Elite AV Receiver 소프트웨어 설명서 - 페이지 27

{카테고리_이름} Pioneer VSX91TXH - Elite AV Receiver에 대한 소프트웨어 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer VSX91TXH - Elite AV Receiver 30 페이지. 7.1 channel a/v receiver featuring dolby® truehd & dts hd® master audio
Pioneer VSX91TXH - Elite AV Receiver에 대해서도 마찬가지입니다: 사양 (2 페이지)

페이지 인쇄

Pioneer VSX91TXH - Elite AV Receiver 소프트웨어 설명서

Troubleshooting (Continued)

Cannot send measurement data to PC

Cause 1:

Random transmission errors sometimes occur.

Even if an error occurred on your first attempt, try sending the data again. Sometimes the transmission

succeeds when you try again.

Cause 2:

Messages like the following may appear if a transmission error occurs.

Try the following, in the order indicated.

1) In the setup screen of the receiver, check that "Start the MCACC application on your PC" is

displayed. (This message indicates that the receiver is ready to send data to the PC.)

2) Check that the RS-232C cable is properly connected. (Be sure to switch off all components and

disconnect their power cord from the power outlets before changing any cable connections.)

3) Exit any other active applications.

4) Check the COM port number.

5) Check the type of RS-232C cable to use is correct

6) Restart the Advanced MCACC application.

7) Restart your PC.

Cause 3:

The following message may appear and the data transmission may be not

available.

Refer to the operation manual for PC or the application software using the COM port, and make the

connecting COM port available for transmission.

(page

5).

Continue