Pioneer X-HM50-K 사용 설명서 - 페이지 7

{카테고리_이름} Pioneer X-HM50-K에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer X-HM50-K 28 페이지. Cd receiver system

페이지 인쇄

System connections

Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet.

Right speaker

Wall socket

(AC 220 V to 230 V, 50 Hz/60 Hz)

DAB/FM aerial connection

Connect the supplied DAB/FM aerial wire to the DAB/

FM socket and position the DAB/FM aerial wire in the

direction where the strongest signal can be received.

Note

Placing the aerial on the unit or near the AC power lead

may cause noise pickup. Place the aerial away from the

unit for better reception.

Speaker connection

• Twist exposed wire strands together.

• Connect the red wire to the plus (+)

terminal, and other wire to the

minus (–) terminal.

• Use speakers with an impedance of

4 ohms - 16 ohms, as lower impedance

speakers can damage the unit.

• These speaker terminals carry

. To prevent the risk of electric shock when

voltage

connecting or disconnecting the speaker cables,

disconnect the power cord before touching any

uninsulated parts.

• Do not attach these speakers to the wall or ceiling,

as they may cause injury in the event of a fall.

• Do not mistake the right and the left channels. The

right speaker is the one on the right side when you

face the unit.

• Do not let the bare speaker wires touch each other.

• Do not allow any objects to fall into or to be placed in

the bass reflex ducts.

• Do not stand or sit on the speakers. You may be injured.

• Do not connect the supplied speakers with any other

amplifier. This may result in malfunction or fire.

To video input socket

Incorrect

HAZARDOUS LIVE

Video cable

(not supplied)

Connecting iPod or iPhone to TV

Photo and video files from iPod or iPhone can be viewed

by connecting the system to TV/monitor.

If the TV/monitor has a video input, connect it to the

VIDEO OUT socket at the back of the unit and set the TV

Out on the iPod or iPhone unit to "ON" position.

Note

Please make sure to set iPod unit to either NTSC or PAL

to match your TV signal. Please visit Apple's homepage

for further information.

AC power connection

After checking all the connections have been made

correctly, plug the AC power lead of this unit into the

wall socket.

Note

Unplug the AC power lead from the wall socket if the

unit will not be in use for a prolonged period of time.

CAUTION

Handle the power cord by the plug part. Do not pull out

the plug by tugging the cord, and never touch the power

cord when your hands are wet, as this could cause a

short circuit or electric shock. Do not place the unit, a

piece of furniture, or other object on the power cord or

pinch the cord in any other way. Never make a knot in the

cord or tie it with other cables. The power cords should

be routed so that they are not likely to be stepped on. A

damaged power cord can cause a fire or give you an

electric shock. Check the power cord once in a while. If

you find it damaged, ask your nearest Pioneer authorized

independent service company for a replacement.

Left speaker

DAB/FM aerial