Pioneer AVH-A200BT 운영 매뉴얼 - 페이지 5

{카테고리_이름} Pioneer AVH-A200BT에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer AVH-A200BT 30 페이지. Dvd rds av receiver

페이지 인쇄

VOL (+/

)

MUTE

Press to display the top menu screen.

Press and hold to power off. To power back on, press any button.

NOTE

The

icon appears when the power is on.

DISP

Press to turn the display on or off.

Performs manual seek tuning, fast forwards, reverse and track search controls.

Press to answer or end a call.

RESET

Press to reset the microprocessor (page 5).

Refer to Inserting and ejecting a disc (page 12).

Disc-loading slot

LCD screen

Basic operation

Resetting the microprocessor

CAUTION

• Pressing the RESET button resets settings and recorded contents to the factory settings.

– Do not perform this operation when a device is connected to this product.

– Some of the settings and recorded contents will not be reset.

• The microprocessor must be reset under the following conditions:

– Prior to using this product for the first time after installation.

– If this product fails to operate properly.

– If there appears to be problems with the operation of the system.

Turn the ignition switch OFF.

Press RESET with a pen tip or other pointed tools.

Settings and recorded contents are reset to the factory settings.

Starting up the unit

Start the engine to boot up the system.

The [Select Program Language] screen appears.

NOTE

From the second time on, the screen shown will differ depending on the previous conditions.

Touch the language.

Touch

The top menu screen appears.

Using the touch panel

You can operate this product by touching the keys on the screen directly with your

fingers.

NOTE

To protect the LCD screen from damage, be sure to touch the screen only with your finger gently.

Common touch panel keys

Switches between playback and pause.

Skips files (or tracks) forwards or backwards.

Performs fast reverse or fast forwards.

Touch again to change the playback speed.

Stops playback.

Text

When all characters are not displayed, the rests are automatically scrolled on

information

the display. The characters are displayed by touching the text information.

NOTE

This function is available only when you stop your vehicle in a safe place and apply

the handbrake.

Returns to the previous screen.

Close the screen.

Operating list screens

Touching an item on the list allows you to narrow down the options and

proceed to the next operation.