Pioneer AVH-X5800DAB 설치 매뉴얼 - 페이지 7

{카테고리_이름} Pioneer AVH-X5800DAB에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer AVH-X5800DAB 48 페이지. Dvd rds av receiver
Pioneer AVH-X5800DAB에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 펌웨어 업데이트 지침 (3 페이지)

페이지 인쇄

Installation

3 Pull the unit out of the holder.

1 Extraction key

Installation with the holder

1 Install the holder into the dashboard.

2 Secure the mounting sleeve by using a screw-

driver to bend the metal tabs (90°) into place.

1 Dashboard

2 Holder

3 Install this product into the holder.

1 Dashboard

4 Attach the trim ring.

1 2

1 Trim ring

2 Groove

Attach the trim ring with the side with a groove facing

downward.

Installation using the screw

holes on the side of this

product

1 Fastening this product to the factory

radio-mounting bracket.

Position this product so that its screw holes are aligned with

the screw holes of the bracket, and tighten the screws at three

locations on each side.

Use either the truss head screws (5 mm × 8 mm) or flush

surface screws (5 mm × 9 mm), depending on the shape of the

bracket's screw holes.

1 Factory radio-mounting bracket

2 If the pawl interferes with installation, you may bend it down

out of the way.

3 Dashboard or console

4 Truss head screw or flush surface screw

Be sure to use the screws supplied with this product.

Installing the microphone



Install the microphone in a place where its direction and dis-

tance from the driver make it easiest to pick up the driver's

voice.



Be sure to turn off (ACC OFF) the product before connecting

the microphone.

Mounting on the sun visor

1 Fit the microphone lead into the groove.

1 Microphone lead

2 Groove

2 Attach the microphone clip to the sun visor.